[ADSM-L] MSL 6060 and TSM 5.3.5.0
2007-03-30 15:43:30
Dear All,
I am using Windows 2003 with SP2 and trying to install HP MSL 6060 tape library
with 2 Ultrium 2 drives and 60 slots.
Steps followed:
1- Stoped the Windows Removable Storage Managment Service.
2- Powered up the library and when prompted installed all the drivers for it
using HP drivers and its installation procedures.
3- The library and two drives are visible appropriately in the Computer
Management --> Devices
4- Installed TSM 5.3.0 and upgraded to 5.3.1.0 then 5.3.2.0 then 5.3.3.0 then
5.3.4.0 then 5.3.5.0.
2- Installed ISC and Admin Center
3- Started TSM Management Console
4- Started initial configuration wizard and moved well till the device
configuration appears.
5------- The devices can't be found by the server.
5555 ---- As I see in the TSM Device Driver section --- I can see clearly
Library and two drives with all the information including Serial numbers etc.
6- I then try to add library with Admin center .. and it does.
7- I then try to add a drive to the library and it fails saying that the
object you are trying to access do not exist.
Where am I wrong??
Kindly anyone enlighten me on this !!!
Thanking you !
Sadi
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- [ADSM-L] MSL 6060 and TSM 5.3.5.0,
Sadi <=
|
|
|