Thanks for the suggestions.
Unfortunately, we are highly unlikely to get 4GB HBAs, especially since
nothing in our SAN fabric goes higher than 2GB GBICs.
Bob Booth <booth AT UIUC DOT EDU>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
01/09/2007 01:06 PM
Please respond to
"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
To
ADSM-L AT VM.MARIST DOT EDU
cc
Subject
Re: [ADSM-L] Recommendations for hardware replacement/upgrade
On Tue, Jan 09, 2007 at 09:59:20AM -0500, Zoltan Forray/AC/VCU wrote:
> Windows is not in the picture. These are going to be RH Linux systems.
>
> We will probably perform EXPORT TO SERVER to move the clients, one by
one,
> since we are probably going to move to new media types (3592 vs 3590) ,
as
> well.
Look for the type of system that will give you the most PCI-X bandwidth
you
can get. You are going to be pumping quite a bit of data across that bus,
with presumably 4Gb HBA's, some SCSI (?), networking... TSM is all about
I/O, to disk, tape, and the network.
hth,
bob
|