Hi,
My TSM V5.3 Server is running on Windows 2003, and IBM 3584 Tape library
is connected through SAN.
Through ISC Administration center, under storage devices the library
status is good. But the drives status is UNKNOWN.
Please tell me how I can proceed further.
Thanks and Regards
Murugan
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Farren Minns
Sent: Thursday, December 28, 2006 3:29 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] TAPE DRIVE STATE UNKNOWN
Hi
I sometimes have network related issues with my 3494 library. How is
your
TSM server connected to the library and what OS is the server? When you
start TSM, does it actually say that the library is ready for
operations?
My library is directly attached with a crossover network cable so it's
on
its own private network. If I get issues with communication, i just
unplug
the network cable from the back of the server, leave it a few seconds
and
then plug it back in. It normally establishes a connection again and
things are OK.
Farren
----------------------------------------------------------------------
The information contained in this e-mail and any subsequent
correspondence is private and confidential and intended solely
for the named recipient(s). If you are not a named recipient,
you must not copy, distribute, or disseminate the information,
open any attachment, or take any action in reliance on it. If you
have received the e-mail in error, please notify the sender and delete
the e-mail.
Any views or opinions expressed in this e-mail are those of the
individual sender, unless otherwise stated. Although this e-mail has
been scanned for viruses you should rely on your own virus check, as
the sender accepts no liability for any damage arising out of any bug
or virus infection.
John Wiley & Sons Limited is a private limited company registered in
England with registered number 641132.
Registered office address: The Atrium, Southern Gate, Chichester,
West Sussex, PO19 8SQ.
----------------------------------------------------------------------
DISCLAIMER:
This email (including any attachments) is intended for the sole use of the
intended recipient/s and may contain material that is CONFIDENTIAL AND PRIVATE
COMPANY INFORMATION. Any review or reliance by others or copying or
distribution or forwarding of any or all of the contents in this message is
STRICTLY PROHIBITED. If you are not the intended recipient, please contact the
sender by email and delete all copies; your cooperation in this regard is
appreciated.
|