Re: SL500 installation
2006-12-05 05:24:12
Hi,
Forget the questions..
//Educated...
-----Original Message-----
From: Henrik Wahlstedt
Sent: den 5 december 2006 09:09
To: 'ADSM: Dist Stor Manager'
Subject: SL500 installation
Hi,
I´m running TSM 5.3.4.0 on w2k3 and have a STK9710 and 6 DLT7000 drives
connected to TSM, (all scsi).
When I connect a Sun SL500 with 4 IBM LTO3 (all FC) plug an play finds the
drives but not the library. I manually update the library driver to tsmscsi.sys
(driver properties in dev. manager).
Reboot and define librray and path in TSM, ok.
I run the latest IBM LTO3 driver IBMTape.x86_6141.zip. IBMTape updates all
drivs but I cant connect to STK9710 or DLT7000 drives. When I look at
c:\...\console\tsmdlst TSMscsi is stopped (or disabled).
In TSM mgmt console\device information the device name have been updated for
all libraries and drives from ex. mt.1.0.0.1 to \\.\1. TSM names remains the
same. A reboot doesnt change the behavour.
Questions.
Why does IBMTape disable TSMscsi? My old HW depends on TSMscsi driver...
How do I install the new drives properly?
Any hints are appreciated.
//Henrik
-------------------------------------------------------------------
The information contained in this message may be CONFIDENTIAL and is
intended for the addressee only. Any unauthorised use, dissemination of the
information or copying of this message is prohibited. If you are not the
addressee, please notify the sender immediately by return e-mail and delete
this message.
Thank you.
|
|
|