collocation is set at the storage pool, so the target cartridge storage
pool need to be separate.
>>> fminns AT WILEY.CO DOT UK 11/20/06 9:28 AM >>>
Hi All
Running TSM 5.2.7.2 on Solaris 9 with a collocated tapepool.
At present we only have one backup disk pool, one on-site tapepool and
one
off-site copypool).
I have the following situation. I have just acquired some new servers
that
require backing up and all of them are pretty small and will not have
very
much data changing per day. As such, I do not want them to have 1 tape
each
per collocation as they are 3592's and will mean a lot of wasted space.
So,
what I want to do is put this collection of servers in their own
policy
domain and on their own set of tapes with collocation turned off (they
can
go on the same copypool as this is not collocated at present).
Now, is the only way I can do this to create a new backup diskpool
(backuppool2 for example) and have it migrate to a new on-site
tapepool
(tapepool2) and have that non collocated? And can I still have the new
tapepool pointing to the original copypool?
I'm guessing there's no way round this but would value any opinions.
Thanks
Farren Minns
John Wiley & Sons Ltd
######################################################################
The information contained in this e-mail and any subsequent
correspondence is private and confidential and intended solely
for the named recipient(s). If you are not a named recipient,
you must not copy, distribute, or disseminate the information,
open any attachment, or take any action in reliance on it. If you
have received the e-mail in error, please notify the sender and delete
the e-mail.
Any views or opinions expressed in this e-mail are those of the
individual sender, unless otherwise stated. Although this e-mail has
been scanned for viruses you should rely on your own virus check, as
the sender accepts no liability for any damage arising out of any bug
or virus infection.
######################################################################
The information contained in this electronic message and any attachments to
this message are intended for the exclusive use of the addressee(s) and may
contain information that is confidential, privileged, and/or otherwise exempt
from disclosure under applicable law. If this electronic message is from an
attorney or someone in the Legal Department, it may also contain confidential
attorney-client communications which may be privileged and protected from
disclosure. If you are not the intended recipient, be advised that you have
received this message in error and that any use, dissemination, forwarding,
printing, or copying is strictly prohibited. Please notify the New York State
Thruway Authority immediately by either responding to this e-mail or calling
(518) 436-2700, and destroy all copies of this message and any attachments.
|
