ADSM-L

Re: TSM and ASR recovery of Windows 2003 server

2006-08-24 10:04:40
Subject: Re: TSM and ASR recovery of Windows 2003 server
From: Tim Brown <tbrown AT CENHUD DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Thu, 24 Aug 2006 10:03:09 -0400
Stuart

THANKS !!!!!!

The install of the Nic drivers from the secondary dos windows worked !!

Tim

----- Original Message -----
From: "Pitt, Stuart" <STUART.PITT AT RWENPOWER DOT COM>
To: <ADSM-L AT VM.MARIST DOT EDU>
Sent: Wednesday, August 23, 2006 2:35 PM
Subject: Re: TSM and ASR recovery of Windows 2003 server


Hi Tim,

Yes we've seen this problem with our HP servers. What we do is create a
slipstream cd with windows 2003, sp1 and the nic card drivers on it.(of
course you may be using 2003 G2) We use a useful utility called nlite.
It's
gui based and is freeware. Another way to get around this problem is to
install the nic card drivers from the dos window that you get at the
select
option 1 for network or 2 for local backupset. The dos window is minimized
when you get to this window.

Regards

Stuart

Stuart Pitt,
IBM Certified Deployment Professional TSM 5.2
IBM Certified Administrator TSM V 5
Data Management and Implementation
RWE npower
Trigonos Building
Swindon
Tel Int 7 322 3253
Tel Ext 01793 893253
Stuart.Pitt AT RWEnpower DOT com






-----Original Message-----
From: Tim Brown [mailto:tbrown AT CENHUD DOT COM]
Sent: 23 August 2006 16:22
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [ADSM-L] TSM and ASR recovery of Windows 2003 server


I am going through the ASR function of TSM while installing Windows 2003.
The install does not install the NIC driver and without that ASR wont work
unlesss I used backupsets. I am using a farily new IBM server that uses
Broadcom nic drivers

Any one seen this issue before.
.

Tim Brown
Systems Specialist
Central Hudson Gas & Electric
284 South Ave
Poughkeepsie, NY 12601
Email: tbrown AT cenhud DOT com
Phone: 845-486-5643
Fax: 845-486-5921
Cell: 845-235-4255


****************************************************************************
The information contained in this email is intended only for the use of
the intended recipient at the email address to which it has been
addressed. If the reader of this message is not an intended recipient, you
are hereby notified that you have received this document in error and that
any review, dissemination or copying of the message or associated
attachments is strictly prohibited.

If you have received this email in error, please contact the sender by
return email or call 01793 877777 and ask for the sender and then delete
it immediately from your system.Please note that neither RWE npower nor
the sender accepts any responsibility for viruses and it is your
responsibility to scan attachments (if any).
*****************************************************************************