How to Clear Source Element Address for IBM 3584
2006-08-21 15:31:53
In working with IBM3584 library, after a tape is checkout of the library
into I/O bin, using tapeutil command, if inventory is queried it will
display checkout name volume and source element address where it came from.
The library has been partitioned into two libraries smc0 and smc1 and this
checked out tape volume came from smc0 with source element address 1033.
I would like to check this tape volume into smc1, but this source element
it came from is not part of smc1 so cannot be checked in. When tried to
check in this tape into smc1, received ANR8828E
ANR8828E Slot element number of library library name is inaccessible
Import/Export Station Address 769
Import/Export State ............ Normal
ASC/ASCQ ....................... 0000
Media Present .................. Yes
Media Placed by Operator ....... No
Import Enabled ................. Yes
Export Enabled ................. Yes
Robot Access Allowed ........... Yes
Source Element Address ......... 1033
Media Inverted ................. No
Volume Tag ..................... XXXXXXL1
Thus far, only way to check this tape into the library smc1 is to remove
from the i/o door and insert it back in so that library will think this
tape is a new tape and source element address is blank.
My question is can this operation can be done without a manual
intervention? if so how ? Is there a way to clear source element address
1033 via command line?
Sung
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- How to Clear Source Element Address for IBM 3584,
Sung Y Lee <=
|
|
|