Andrew
I install TSA5UP19 and still I see in volume EV1: the filenames in Dos format
, by the way in SYS: and Vol1: volumes no problem I got long filename!!!!!
Thanks Robert
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Andrew Ferris
Sent: Tuesday, May 09, 2006 5:57 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Novell question !!!!!!
Robert
The only thing I'd suggest is to make sure you're at the latest SMS update
level which I believe is still TSA5UP19. There have been a bunch of fixes in
the last couple of releases. 19 is newer than the modules in SP5. Hope that
helps,
Andrew Ferris
Network Support Analyst
iCAPTURE Research Centre
University of British Columbia
>>> Troy.Frank AT UWMF.WISC DOT EDU 5/9/2006 7:22:04 am >>>
Unfortunately, it doesn't appear that my suggestion applies to you.
EV1: is an NSS volume, and already has the LONG namespace loaded on it.
In the old days on Traditional Volumes, it didn't always default to that.
Might be worth opening a ticket with novell for that one.
>>> rouzen AT UNIV.HAIFA.AC DOT IL 5/9/2006 9:05 AM >>>
Hi Troy
Here what I got running VOLUMES in the Netware server:
3 local FAT volumes mounted
Mounted Volumes Name Spaces Flags
SYS DOS, MAC, NFS, LONG NSS
_ADMIN DOS, MAC, NFS, LONG NSS P
VOL1 DOS, MAC, NFS, LONG NSS
EV2 DOS, MAC, NFS, LONG NSS
EV1 DOS, MAC, NFS, LONG NSS
5 volumes mounted
Can you explain a little beat more about "load long" ????? It is a novell
command ???? And how to add name space long to EV1: ????
Can you send me an example !!!!!
Thanks in advance .....
Robert
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Troy Frank
Sent: Tuesday, May 09, 2006 4:45 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Novell question !!!!!!
sys: & vol1: appear to be getting recognized as "long filename"
filesystems under the "Type" column, while ev1: isn't. Is EV1: an nss volume,
or traditional? In my case, I've got a couple servers attached to ibm ds4300's
(fastt600), where sys: is local, and vol1: is on the san. When I do a "q
files", both sys: and vol1: are listed as type "NTW:LONG" even though vol1:
isn't a local volume.
If it turns out that the EV1: volume just never got the "Long"
namespace added to it, you can do a "load long", then "add name space long to
ev1:". If EV1: is an nss volume, I'm not quite sure what happened.....they're
supposed to have the LONG namespace added by default.
>>> rouzen AT UNIV.HAIFA.AC DOT IL 5/9/2006 7:42 AM >>>
Hi to all
I have a Netware server with sys: and vol1: local volumes and mounted a disk on
a clariion storage EV1:
Here the output of the command Q FILES
tsm> q files
# Last Incr Date Type File Space Name
--- -------------- ---- ---------------
1 00/00/0000 00:00:00 NTWFS NWCC-CL2\EV1:
2 05/06/2006 22:00:04 NovellSMS NWCC-CL2\SERVER SPECIFIC INFO
3 05/06/2006 22:34:38 NTW:LONG NWCC-CL2\SYS:
4 05/02/2006 22:34:04 NTW:LONG NWCC-CL2\VOL1:
Few questions, I did an online backup of EV1: without any problems , I connect
the client via internet http://xxx.xx.xx.xx:1581 and saw the directories and
files on the restore panel, my first question is why when I load the backup I
see just the local volumes sys: and vol1: (I have in my dsm.opt the line DOMAIN
all-local EV1:) and after changes I unload and load dsmcad ......
My second question is why in the restore panel I see directories with long
names (+8) in dos format xxxxxx~1.
My tsm client version is 5.3.012 and my Netware server version is 6.5
Any help will be appreciate .............
Regards
Robert Ouzen
Confidentiality Notice follows:
The information in this message (and the documents attached to it, if
any)
is confidential and may be legally privileged. It is intended solely for the
addressee. Access to this message by anyone else is unauthorized.
If
you are not the intended recipient, any disclosure, copying, distribution or
any action taken, or omitted to be taken in reliance on it is prohibited and
may be unlawful. If you have received this message in error, please delete all
electronic copies of this message (and the documents attached to it, if any),
destroy any hard copies you may have created and notify me immediately by
replying to this email. Thank you.
Confidentiality Notice follows:
The information in this message (and the documents attached to it, if any) is
confidential and may be legally privileged. It is intended solely for the
addressee. Access to this message by anyone else is unauthorized. If you are
not the intended recipient, any disclosure, copying, distribution or any action
taken, or omitted to be taken in reliance on it is prohibited and may be
unlawful. If you have received this message in error, please delete all
electronic copies of this message (and the documents attached to it, if any),
destroy any hard copies you may have created and notify me immediately by
replying to this email. Thank you.
|
