Re: Netware 5.3.2.x client
2006-02-28 16:54:23
Yeah it's the same with me. Once the server is up, DSMCAD and DSMC run
just fine.
Andrew Ferris
Network Support Analyst
iCAPTURE Research Centre
University of British Columbia
>>> boutilpj AT EDNET.NS DOT CA 2/28/2006 7:32:44 am >>>
Timothy Hughes wrote:
> Ok...For the most part this seems to be a NW 6.5SP5 issue
>
> I know it has been mentioning but when this situation occurs
> does a manual load of the dsmcad at the prompt work
> every time?
Yes, works every time from the prompt for us.
Just need to know before I upgrade to the
> 5.3.012 client.
>
> Thanks
>
>
>
>
>
>
> Thanks
>
> Patrick Boutilier wrote:
>
>> Timothy Hughes wrote:
>>> Thanks Patrick!
>>>
>>> We one Novell client that uses 5.3.0
>>> The NW OS is 6.5SP2
>> The above loads dsmcad out of autoexec.ncf fine?
>>
>>> Another Novell client is at 5.3.03
>>> NW OS5.1 SP7
>>>
>>> Haven't notice a problem as of yet.
>>>
>> <snip>
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Re: Netware 5.3.2.x client, (continued)
- Re: Netware 5.3.2.x client, Patrick Boutilier
- Re: Netware 5.3.2.x client, Richard Sims
- Re: Netware 5.3.2.x client, Patrick Boutilier
- Re: Netware 5.3.2.x client, Timothy Hughes
- Re: Netware 5.3.2.x client, Patrick Boutilier
- Re: Netware 5.3.2.x client, Timothy Hughes
- Re: Netware 5.3.2.x client, Patrick Boutilier
- Re: Netware 5.3.2.x client, Sergio Fuentes
- Re: Netware 5.3.2.x client, Timothy Hughes
- Re: Netware 5.3.2.x client, Patrick Boutilier
- Re: Netware 5.3.2.x client,
Andrew Ferris <=
- Re: Netware 5.3.2.x client, Andrew Ferris
- Re: Netware 5.3.2.x client, Patrick Boutilier
Re: Netware 5.3.2.x client, Troy Frank
|
|
|