Not sure about Windows configuration, but on Solaris I have path defined to a 
drive for library  communication and then one for each drive configuration.  
The one for the library configuration will used one of the drives defined as 
the "Control Path".  

DEFINE PATH WSALEM2 3584LIB1 SRCTYPE=SERVER "DESTTYPE=LIBRARY" 
DEVICE=/dev/rmt/2sm
c ONLINE=YES
DEFINE PATH WSALEM2 RMT1 SRCTYPE=SERVER "DESTTYPE=DRIVE" LIBRARY=3584LIB1 
DEVICE=/
dev/rmt/1st ONLINE=YES

I am not familiar with LTO drives, but you should be able to find information 
from the driver info. 

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of 
Luc Beaudoin
Sent: Thursday, December 01, 2005 3:30 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Install 3584 library

Hi again

TSM versoin 5.2.6 on a WIN2K server

Maybe I dont have the right way to configure my 3584 library in TSM

What should be the basic steps to configure the 3584 in TSM (I have 5 LTO3 
fiber drive)

thanks

Luc




"Barnes, Kenny" <Kenny.Barnes AT GMACINSURANCE DOT COM> Sent by: "ADSM: Dist 
Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
2005-12-01 02:09 PM
Please respond to "ADSM: Dist Stor Manager"

 
        To:     ADSM-L AT VM.MARIST DOT EDU
        cc: 
        Subject:        Re: Install  3584 library


Shouldn't have to define serial number.  This is picked automatically after you 
define a path to one or more of control paths in a fabric environment (if 
used).  For UNIX control paths are defined as "2smc" along with 2st for example.

(Solaris) DEFINE LIBRARY 3584LIB1 LIBTYPE=SCSI SHARED=YES Serial=(picked up 
automatically and added)
(Solaris) DEFINE PATH WSALEM2 3584LIB1 SRCTYPE=SERVER DESTTYPE=LIBRARY 
DEVICE=/dev/rmt/2smc ONLINE=YES 

Or if you really want to get the serial number, use the touch screen on the 
front of the library or use IP address if already assigned after plugging it 
into a browser.

TSM version?
OS and version?


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of 
Luc Beaudoin
Sent: Thursday, December 01, 2005 1:47 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Install 3584 library

Hi ..

I cant select    serial=autodetect ...

When U go in AUTOMATED LIBRARY / define automated library  ... it aks U for a 
library name and serial !!!

Luc




"Bos, Karel" <Karel.Bos AT ATOSORIGIN DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
2005-12-01 12:34 PM
Please respond to "ADSM: Dist Stor Manager"

 
        To:     ADSM-L AT VM.MARIST DOT EDU
        cc: 
        Subject:        Re: Install  3584 library


Serial=autodetect?
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of 
Luc Beaudoin
Sent: donderdag 1 december 2005 17:51
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Install 3584 library

I received my new library 3584

I have to configure it in TSM .... 
The little problem I have is that I am not able to find the serial number of 
the Library ... 

any quick idea ??
thanks

Luc Beaudoin
Administrateur Réseau / Network Administrator Hopital General Juif S.M.B.D.
Tel: (514) 340-8222 ext:8254
--------------------------------------------------------------------------------------------------------------------------------------------------
Note:  The information contained in this message may be privileged and 
confidential and protected from disclosure.  If the reader of this message is 
not the intended recipient, or an employee or agent responsible for delivering 
this message to the intended recipient, you are hereby notified that any 
dissemination, distribution or copying of this communication is strictly 
prohibited.  If you have received this communication in error, please notify us 
immediately by replying to the message and deleting it from your computer. 
 Thank you.
--------------------------------------------------------------------------------------------------------------------------------------------------