ADSM-L

Re: SAN switch IBM 2109-F16

2005-12-01 10:15:22
Subject: Re: SAN switch IBM 2109-F16
From: Rick Saylor <rsaylor AT AUSTINCC DOT EDU>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Thu, 1 Dec 2005 09:15:07 -0600
Luc,

Maybe be the Windows XP firewall is blocking the connection? You might try turning off the built-in firewall or using another system to download the firmware from instead of your laptop. Also, I noticed that the manual states RSHD is for UNIX systems. Maybe this is your problem?

Thanks,
Rick Saylor
Austin Community College

At 08:39 AM 12/1/2005, you wrote:
Hi Arnaud

I can connect to the switch with hyper terminal ...
I put my userame Admin and password ...

here's the steps

- run the RSHD.EXE deamon
- firmwaredownload
- IP or host               I type the IP of my laptop
- username             admin
-filename                 c:/2109/v3.2.0a
-RSHD or FTP       RSHD


then I wait ... but it doesn't do anything ...

I dont know ... I tried the file name with " " or \ and /   same problem
...

thanks

Luc




PAC Brion Arnaud <Arnaud.Brion AT PANALPINA DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
2005-12-01 09:29 AM
Please respond to "ADSM: Dist Stor Manager"


        To:     ADSM-L AT VM.MARIST DOT EDU
        cc:
        Subject:        Re: SAN switch IBM 2109-F16


Luc,

What exactly is your problem : no connection to the switch with hyper
terminal, or something else ?
Cheers.

Arnaud

******************************************************************************
Panalpina Management Ltd., Basle, Switzerland,
CIT Department Viadukstrasse 42, P.O. Box 4002 Basel/CH
Phone:  +41 (61) 226 11 11, FAX: +41 (61) 226 17 01
Direct: +41 (61) 226 19 78
e-mail: arnaud.brion AT panalpina DOT com
******************************************************************************

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Luc Beaudoin
Sent: Thursday, 01 December, 2005 15:05
To: ADSM-L AT VM.MARIST DOT EDU
Subject: SAN switch IBM 2109-F16

Hi all
it's not a TSM question ... but if someone knows how to do that ,,

I have a problem with one of my 2109-F16 SAN switch ... I have to upgrade
the firmware to version v3.2.0a by the serial port ....
How can I do that ... I read the documentation ... but doesn't work ...

I'm connecting my WIN XP laptop to the switch , then use Hyper Terminal to
connect to the switch ... I probably have a syntax problem .. but  I don't
see where ...
any ideas  ???

thanks

Luc Beaudoin
Administrateur Réseau / Network Administrator Hopital General Juif
S.M.B.D.
Tel: (514) 340-8222 ext:8254

<Prev in Thread] Current Thread [Next in Thread>