Reclamation should give you a lot of free tapes.
Use the undocumented command "show mp" to display who
uses the mountpoint.
If you can't determine the process/session holding the tape than you'll
have to restart TSM.
Then set the reclamation value of your tapestoragepools below 89% and
you'll get at least 5 scratch tapes.
HTH
Thomas
-----Ursprüngliche Nachricht-----
Von: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] Im Auftrag
von Marcelo Barreto
Gesendet: Dienstag, 29. November 2005 13:57
An: ADSM-L AT VM.MARIST DOT EDU
Betreff: [ADSM-L] Run out of scratch tapes
Hi, I´m new in TSM, I´ve 29 tapes and 2 drives, all of my tapes are in private
state, some are in filling status and others in full, if I execute the sentence:
select volume_name, pct_utilized, status, pct_reclaim from volumes where
pct_utilized < 20
I get
VOLUME_NAME PCT_UTILIZED STATUS PCT_RECLAIM
------------------ ------------ ------------------ -----------
DYI502 0.0 FILLING 0.0
DYI508 4.7 FILLING 38.5
DYI511 12.0 FILLING 33.0
DYI513 9.1 FILLING 34.4
DYI515 9.9 FILLING 26.7
FZW939 6.7 FILLING 36.8
FZW941 2.4 FULL 97.5
FZW943 0.7 FULL 99.2
FZW945 16.2 FULL 89.1
FZW947 14.7 FULL 89.4
I need to make some space but the reclamation process didn´t free some space,
I´ve executed move data command but one of the drives shows
ANR8376I Mount point reserved in device class DC-SUNL1000, status: RESERVED
When I execute q mount command.
How could I get some scratch tapes as soon as possible?
Thanks in advance.
Marcelo.
|