Thanks!  I used the move command, and it even made the volume a scratch
tape.  That was just what I needed.  Thanks!

Aaron

>>> AMeadows AT BMI DOT COM 10/27/2005 3:19:24 PM >>>
Ok now sorry here is what I meant.

Check the reclaim storage pool of the  HI_Crit_tapepool with q stg
HI_Crit_tapepool f=d.

Also to move the data use the command move data (volser number)
stg=target stgpool

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
Of
Aaron Becar
Sent: Thursday, October 27, 2005 5:29 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Move Volumes

Sorry to bother everyone but I have a serious question.

We have mixed media, LTO1 and LTO2.  The LTO1 is strictly for our TSM
database backup.  The LTO2 is for our storage pools.  For some reason
our HI_CRIT_Tapepool is reclaiming to a LTO1 tape.  How can I move the
information from the LTO1 tape to an LTO2 tape, and make sure none of
the data is lost, and make sure it belongs to the HI_Crit_tapepool.
Thanks!

Aaron
********************************************
This message is intended only for the use of the Addressee and
may contain information that is PRIVILEGED and CONFIDENTIAL.

If you are not the intended recipient, you are hereby notified
that any dissemination of this communication is strictly prohibited.

If you have received this communication in error, please erase
all copies of the message and its attachments and notify us
immediately.

Thank you.
********************************************