RC of -50 is a network connectivity issue. You may have mismatched
speed/duplex issues, bad NIC driver, poorly designed network, or some
such. This is not a TSM issue.


--
Mark Stapleton (stapleton AT berbee DOT com)
IBM Certified Advanced Deployment Professional
 Tivoli Storage Management Solutions 2005
IBM Certified Advanced Technical Expert (CATE) AIX
Berbee Information Networks
Office 262.521.5627

 

>-----Original Message-----
>From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On 
>Behalf Of Cameron Ambrose
>Sent: Sunday, October 09, 2005 9:06 PM
>To: ADSM-L AT VM.MARIST DOT EDU
>Subject: Slow/Failed Netware 6.5 backups
>
>Hello,
>
>      Sorry resubmitting with a valid subject.
>
>      We're currently experiencing backup failures/extreme 
>slowness on a
>Netware 6.5 SP2  server
>
>            TSM Client 5.3.0
>            TSM Server 5.2.0
>            TSA's up to date as recommended by Client Doco
>
>      Client Logs
>            10/05/2005 14:43:19 ANS1809W Session is lost; initializing
>session reopen procedure.
>            10/05/2005 14:43:19 ANS1809W Session is lost; initializing
>session reopen procedure.
>            10/05/2005 14:44:15 sessRecvVerb: Error -50 from call to
>'readRtn'.
>            10/05/2005 14:44:15 ANS1999E Incremental 
>processing of 'SYS:'
>stopped.
>
>            10/05/2005 14:48:24 ANS1999E Incremental 
>processing of 'INF:'
>stopped.
>
>            10/05/2005 14:48:25 ANS1017E Session rejected: TCP/IP
>connection failure
>
>
>      Server Logs
>
>            10/05/05   14:39:53      ANR0481W Session 2177 for node
>SERVERNAME (NetWare)
>                              terminated - client did not 
>respond within
>180 seconds.
>            10/05/05   14:41:10      ANR0406I Session 2178 
>started for node
>SERVERNAME
>                              (NetWare) (Tcp/Ip 
>xxx.xxx.xxx.xxx(19578)).
>
>
>
>
>      Currently we have had a backup running for 24 hours and 
>all that has
>been transfered is 4.19 gig and 255,000 files scanned. Has anyone else
>experienced similar issue's
>
>      Any help on this would be appreciated
>      Regards Cameron
>