ADSM-L

Re: Upgrade to TSM 5.3 w/ TSM 5.2 Web interface messes up admin windo w frame

2005-10-05 10:55:35
Subject: Re: Upgrade to TSM 5.3 w/ TSM 5.2 Web interface messes up admin windo w frame
From: Nancy L Backhaus <Backhaus.Nancy AT HEALTHNOW DOT ORG>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Wed, 5 Oct 2005 10:54:53 -0400
I believe IBM TSM is working on this.  I opened a PMR with TSM, and the
support person stated that there are 5 other new pmrs on this same issue.
I am awaiting feedback from TSM support on this issue.

We are at TSM Version 5.2.3.5, AIX OS Level 5.3 Mod 2 - We just upgraded
the AIX OS to 5.3 Mod 3 on Monday....and the same issue is now occuring in
our environment.  With the operations results opening in a seperate frame.


Nancy Backhaus
Enterprise Systems
Backhaus.Nancy AT HealthNow DOT org
Office: (716) 887-7979
Cell: (716)  609-2138




Ben Bullock <bbullock AT MICRON DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
10/05/2005 10:40 AM
Please respond to "ADSM: Dist Stor Manager"


        To:     ADSM-L AT VM.MARIST DOT EDU
        cc:
        Subject:        Re: Upgrade to TSM 5.3 w/ TSM 5.2 Web interface messes 
up admin windo w
frame


                 Interesting, I have done the same thing in our AIX test
environment in preparation to go to TSM 5.3 and have exactly the same
thing. Funny thing is that we have done the same thing on our test
Solaris TSM server and it worked fine.

                 Is you installation on AIX 5.3 also? I was wondering if
there
was some prereq fileset that is missing or something...

Ben


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
John Schneider
Sent: Wednesday, October 05, 2005 8:06 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Upgrade to TSM 5.3 w/ TSM 5.2 Web interface messes up admin
windo w frame

Greetings,
     I posted this to the list last week, but for some reason I have not
been getting the digest, so I decided I better post it again in case
people replied and I didn't get it.  Sorry for the redundant traffic.
     I just upgraded a AIX 5.3 TSM server to TSM 5.3.1.6 and also
installed the migration TSM 5.2 Web interface. The 5.2 Web interface
basically works, but the center frame is missing. The left hand
navigation bar is correct, but when I open up something that should
produce content in the center frame, instead it opens a whole new window
and puts the content there. I can limp along with this behavior, but it
is annoying to have to go back and forth between two windows. This
happens on every browser we try, both Explorer and Netscape, so it isn't
tied to the browser I don't think.
If this is an old topic I am sorry, I looked for it on the archives and
couldn't find it.
  I have trouble believing it is happening to us, but no one else.

Best Regards,

John D. Schneider
Technology Consultant




CONFIDENTIALITY NOTICE: This email message and any attachments are for the sole 
use of the intended recipient(s) and may contain proprietary, confidential, 
trade secret or privileged information.  Any unauthorized review, use, 
disclosure or distribution is prohibited and may be a violation of law.  If you 
are not the intended recipient or a person responsible for delivering this 
message to an intended recipient, please contact the sender by reply email and 
destroy all copies of the original
message.

<Prev in Thread] Current Thread [Next in Thread>