hi fellas !
just a quick one,
how to redirect outpur from tapeutil to a file ?
i would like to file element inventory, thanks ...
goran
vipnet
problems following, if any want to take a look
thanks ...
ANR8457I AUDIT LIBRARY: Operation for library LTO_LIB03 started as process
9.
ANR8300E I/O error on library LTO_LIB03 (OP=00006C03, CC=207, KEY=05,
ASC=83, ASCQ=04,
SENSE=70.00.05.00.00.00.00.0A.00.00.00.00.83.04.42.00.00.00.,
Description=Device is not in a state capable of performing request). Refer
to Appendix D in the 'Messages' manual for recommended
action.
ANR8942E Could not move volume NOT KNOWN from slot-element 4096 to
slot-element 261.
ANR8460E AUDIT LIBRARY process for library LTO_LIB03 failed.
ANR0985I Process 9 for AUDIT LIBRARY running in the BACKGROUND completed
with completion state FAILURE at 11:07:18.
ANR8470W Initialization failure on drive DRIVE04 in library LTO_LIB03.
ANR8912E Unable to verify the label of volume from slot-element 16 in drive
DRIVE04 (/dev/rmt4) in library LTO_LIB03.
ANR8951I Device /dev/rmt4, volume unknown has issued the following
Information TapeAlert: The tape in the drive is a cleaning
cartridge.
ANR8302E I/O error on drive DRIVE05 (/dev/rmt4) (OP=WRITE, Error Number=5,
CC=0, KEY=0B, ASC=4B, ASCQ=00,
SENSE=70.00.0B.00.00.00.00.0A.00.00.00.00.4B.00.00.00.00.00,
Description=An undetermined error has occurred). Refer to Appendix D in the
'Messages' manual for recommended action.
ANR1411W Access mode for volume 963AGG now set to "read-only" due to write
error.
IBM Tape Device Error Log Analysis
A00000
NAME: rmt4 LOCATION: 20-58-0 DEVICE TYPE: 3580
DATE: 07/28/05 04:54:00 SEQUENCE #26232 ERROR ID: HARDWARE ERROR
SCSI CDB: 0A0004000000
SCSI STATUS BYTE: CHECK CONDITION SENSE KEY: B ASC/ASCQ: 4B00
SCSI SENSE BYTES 0-17:
70000B000000000A000000004B0000000000
SCSI EXTENDED SENSE BYTES:
0000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000
NAME: rmt4 LOCATION: 20-58-0 DEVICE TYPE: 3580
DATE: 07/28/05 04:53:31 SEQUENCE #26231 ERROR ID: HARDWARE ERROR
SCSI CDB: 0A0004000000
SCSI STATUS BYTE: CHECK CONDITION SENSE KEY: B ASC/ASCQ: 4B00
SCSI SENSE BYTES 0-17:
70000B000000000A000000004B0000000000
SCSI EXTENDED SENSE BYTES:
0000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000
Drive Address 256
Drive State .................... Abnormal
ASC/ASCQ ....................... 8300
Media Present .................. Yes
Robot Access Allowed ........... No
Source Element Address Valid ... No
Media Inverted ................. No
Same Bus as Medium Changer ..... Yes
SCSI Bus Address ............... 0
Logical Unit Number Valid ...... No
Volume Tag .................
+----------------+
| |
| 261 drive 3 |
+----------------+
| |
| 260 drive 2 |
+----------------+
| |
| 259 drive 6 |
+----------------+
| |
| 258 drive 5 |
+----------------+
| |
| 257 drive 1 |
+----------------+
| |
| 256 drive 4 |
+----------------+
is DRIVE04 faulty ?
|