Hi everyone,
Here's an interesting little piece of activity log from one of my remote
TSM servers.... Gotta like TapeAlert. Other than being an amusing way to
start my day, everything checks out OK and I can't believe it.
1. The 6AM job is a copy stgpool operation.
2. Despite the TapeAlert warnings, there were no stuck tapes.
3. L20014 wasn't "snapped" when visually inspected.
4. The library wouldn't mount tapes even though no drives were being used.
5. Stopped TSM, rebooted the library, started TSM and all was well again.
6. Audited each volume reported below without a single failure.
TSM Server: 5.2.4.1
OS AIX 5.2
Library 3583 with 3 LTO2 drives (SCSI)
I don't really have a question, just thought it was odd and someone might
have insight.
Date/Time Message
--------------------
----------------------------------------------------------
03/31/2005 06:00:50 ANR8949E Device /dev/smc0, volume has issued the
following Critical TapeAlert: The library can
not operate
without the magazine. 1. Insert the magazine
into the
library. 2. Restart the operation. (SESSION:
21550,
PROCESS: 784)
03/31/2005 06:11:36 ANR8950W Device /dev/rmt1, volume L20056 has
issued the
following Warning TapeAlert: The cartridge is
not
data-grade. Any data you write to the tape is
at risk.
Replace the cartridge with a data-grade tape.
(SESSION:
21550, PROCESS: 784)
03/31/2005 06:11:36 ANR8950W Device /dev/rmt1, volume L20056 has
issued the
following Warning TapeAlert: The tape drive may
have a
hardware fault. Run extended diagnostics to
verify and
diagnose the problem. Check the tape drive
users manual
for device specific instruction on running
extended
diagnostic tests. (SESSION: 21550, PROCESS: 784)
03/31/2005 06:17:33 ANR8950W Device /dev/rmt2, volume L20066 has
issued the
following Warning TapeAlert: The cartridge is
not
data-grade. Any data you write to the tape is
at risk.
Replace the cartridge with a data-grade tape.
(SESSION:
21550, PROCESS: 786)
03/31/2005 06:17:33 ANR8950W Device /dev/rmt2, volume L20066 has
issued the
following Warning TapeAlert: The tape drive may
have a
hardware fault. Run extended diagnostics to
verify and
diagnose the problem. Check the tape drive
users manual
for device specific instruction on running
extended
diagnostic tests. (SESSION: 21550, PROCESS: 786)
03/31/2005 06:39:38 ANR8950W Device /dev/rmt4, volume L20014 has
issued the
following Warning TapeAlert: The cartridge is
not
data-grade. Any data you write to the tape is
at risk.
Replace the cartridge with a data-grade tape.
(SESSION:
21550, PROCESS: 785)
03/31/2005 06:39:39 ANR8948S Device /dev/rmt4, volume L20014 has
issued the
following Critical TapeAlert: The operation has
failed
because the tape in the drive has snapped: 1. Do
not
attempt to extract the tape cartridge. 2. Call
the tape
drive supplier help line. (SESSION: 21550,
PROCESS: 785)
03/31/2005 06:39:39 ANR8949E Device /dev/rmt4, volume L20014 has
issued the
following Critical TapeAlert: The tape drive
needs
cleaning: 1. If the operation has stopped,
eject the
tape and clean the drive. 2. If the operation
has not
stopped, wait for it to finish and then clean
the drive.
Check the tape drive users manual for device
specific
cleaning instructions. (SESSION: 21550, PROCESS:
785)
03/31/2005 06:39:39 ANR8950W Device /dev/rmt4, volume L20014 has
issued the
following Warning TapeAlert: The tape drive is
due for
routine cleaning: 1. Wait for the current
operation to
finish. 2. Then use a cleaning cartridge. Check
the
tape drive users manual for device specific
cleaning
instructions. (SESSION: 21550, PROCESS: 785)
03/31/2005 06:39:39 ANR8949E Device /dev/rmt4, volume L20014 has
issued the
following Critical TapeAlert: The tape drive has
a
hardware fault: 1. Eject the tape or magazine.
2. Reset
the drive. 3. Restart the operation. (SESSION:
21550,
PROCESS: 785)
03/31/2005 06:39:39 ANR8949E Device /dev/rmt4, volume L20014 has
issued the
following Critical TapeAlert: The tape drive has
a
hardware fault: 1. Turn the tape drive off and
then on
again. 2. Restart the operation. 3. If the
problem
persists, call the tape drive supplier help
line.
(SESSION: 21550, PROCESS: 785)
03/31/2005 06:39:39 ANR8950W Device /dev/rmt4, volume L20014 has
issued the
following Warning TapeAlert: The tape drive has
a problem
with the application client interface: 1. Check
the
cables and cable connections. 2. Restart the
operation.
(SESSION: 21550, PROCESS: 785)
03/31/2005 06:39:39 ANR8950W Device /dev/rmt4, volume L20014 has
issued the
following Warning TapeAlert: The firmware
download has
failed because you have tried to use the
incorrect
firmware for this tape drive. Obtain the
correct
firmware and try again. (SESSION: 21550,
PROCESS: 785)
03/31/2005 06:39:39 ANR8950W Device /dev/rmt4, volume L20014 has
issued the
following Warning TapeAlert: Environmental
conditions
inside the tape drive are outside the specified
temperature range. (SESSION: 21550, PROCESS:
785)
03/31/2005 06:39:39 ANR8950W Device /dev/rmt4, volume L20014 has
issued the
following Warning TapeAlert: The voltage supply
to the
tape drive is outside the specified range.
(SESSION:
21550, PROCESS: 785)
03/31/2005 06:39:39 ANR8950W Device /dev/rmt4, volume L20014 has
issued the
following Warning TapeAlert: The tape drive may
have a
hardware fault. Run extended diagnostics to
verify and
diagnose the problem. Check the tape drive
users manual
for device specific instruction on running
extended
diagnostic tests. (SESSION: 21550, PROCESS: 785)
curtis.stewart AT lawson DOT com
|