Did the problem start before you updated all your components? Here's a
few things I would check first (not neccessarily in this order).
1. Since the server is still v5.2 , I'd try back-revving the novell
tsm client to 5.2.3.0
2. Check the speed/duplex settings of your NIC. If it's at AUTO, try
forcing a speed/duplex. If it's forced now, try setting it to AUTO
3. Check for a newer driver for your NIC.
4. Apply Netware 6 SP5 .
5. Try to determine what event triggered the problems. Some old posts
hint that it could have been installing the newer TSM client.
Look through the dsm.opt for any entries that might have changed
(compare to older clients dsm.opt).
Troy Frank
Network Services
University of Wisconsin Medical Foundation
608.829.5384
>>> cameron_ambrose AT ENTERPRISESERVICES.COM DOT AU 2/21/2005 11:50:46 PM
>>>
Guys,
Is anyone out there experiencing extremely slow backup issue's with
netware 6.x servers? Some of the larger servers are taking days to
complete
a backup. During this time the servers are running at 100%
utilization.
Environment:
Tsm server is 5.2.0 on a solaris Platform
Tsm Client is 5.3.0. Using latest Tsa's, TSAFS.NLM (6.50.14) and
SMDR.NLM (6.54.01)
Client Platform Netware 6, SP3.
I also get the following errors in the client's error log. I can't
seem to find too much info about the sessRecVerb error? Though the
Session
initializing messages are fairly self explanitory.
02/08/2005 00:10:14 sessRecvVerb: Error -50 from call to 'readRtn'.
02/08/2005 00:10:14 ANS1809W Session is lost; initializing session
reopen procedure.
02/08/2005 00:10:15 ANS1809W Session is lost; initializing session
reopen procedure.
Any help on this would be greatly appreciated
thanks in advance Cameron
----------------------------------------
The information contained in this e-mail and any attachments to it:
(a) may be confidential and if you are not the intended recipient, any
interference with, use, disclosure or copying of this material is
unauthorised and prohibited. If you have received this e-mail in
error,
please delete it and notify the sender;
(b) may contain personal information of the sender as defined under
the
Privacy Act 1988 (Cth). Consent is hereby given to the recipient(s) to
collect, hold and use such information for any reasonable purpose in
the
ordinary course of TES' business, such as responding to this email, or
forwarding or disclosing it to a third party.
Confidentiality Notice follows:
The information in this message (and the documents attached to it, if any)
is confidential and may be legally privileged. It is intended solely for
the addressee. Access to this message by anyone else is unauthorized. If
you are not the intended recipient, any disclosure, copying, distribution
or any action taken, or omitted to be taken in reliance on it is
prohibited and may be unlawful. If you have received this message in
error, please delete all electronic copies of this message (and the
documents attached to it, if any), destroy any hard copies you may have
created and notify me immediately by replying to this email. Thank you.
|
