ADSM-L

Re: Config file error

2005-01-18 11:22:25
Subject: Re: Config file error
From: Richard Sims <rbs AT BU DOT EDU>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Tue, 18 Jan 2005 11:21:22 -0500
We're missing the big picture on this, as in where this server restore
is coming from. From the devconfig it looks like you're restoring from
a pre-v5 server, into a v5 server. V5 introduced pathing. You have no
path defined for the library. Ideally, you would first have brought up
the new server with the "toy" db it was installed with, done library +
drive defines (including paths) and then merged the resulting devconfig
into the one you are apparently migrating from the old system. The
lmcp0 belongs on the path definition, not the library definition.

   Richard Sims

On Jan 18, 2005, at 11:07 AM, fred johanson wrote:

I'm testing transferring to a new server, using "restore db", with
these
results:




$ /opt/bin/sudo -u tsm dsmserv restore db devc=tape
volumenames=UC1147,UC6085 >
ANR7800I DSMSERV generated at 08:09:39 on May 17 2004.
****************************************************************
* Patch 5.2.2.5 TSM Server (Driver 0000, Build 04138.0809) *
* This is a server service PATCH based on certified service    *
* level 5.2.2.0 and has not been fully tested.  List of        *
* fixes made can be found in the README                        *
*                                                              *
****************************************************************

Tivoli Storage Manager for AIX-RS/6000
Version 5, Release 2, Level 2.5

Licensed Materials - Property of IBM

(C) Copyright IBM Corporation 1999,2003. All rights reserved.
U.S. Government Users Restricted Rights - Use, duplication or
disclosure
restricted by GSA ADP Schedule Contract with IBM Corporation.

ANR0900I Processing options file dsmserv.opt.
ANR7811I Direct I/O will be used for all eligible disk files.
ANR8200I TCP/IP driver ready for connection with clients on port 1600.
ANR8225I TCP/IP administrative driver ready for connection with
clients on
port
1500.
ANR0200I Recovery log assigned capacity is 10000 megabytes.
ANR0201I Database assigned capacity is 200000 megabytes.
ANR8497E Library 4TESTLIB not defined in device configuration
information
file.$

Here is the devconfig file:


/* Device Configuration File */
DEFINE LIBRARY 4TESTLIB LIBTYPE=MANUAL DEVICE=/dev/lmcp0
DEFINE DRIVE 4TESTLIB DRAC619
DEFINE PATH 4TESTLIB DRAC619 SRCTYPE=SERVER DESTTYPE=DRIVE
LIBRARY=4TESTLIB DEVIC
E=/dev/rmt0 ONLINE=YES
DEFINE DEVCLASS TAPE DEVTYPE=3590 FORMAT=DRIVE MOUNTLIMIT=DRIVES
MOUNTWAIT=60 MOU
NTRETENTION=2 PREFIX=ADSM LIBRARY=4TESTLIB

I can't see the error.

TSM 5.2.2.5
AIX 5.2.0.0

Fred Johanson
ITSM Administrator
University of Chicago
773-702-8464

<Prev in Thread] Current Thread [Next in Thread>