Hi All,
Is anyone doing LAN Free backups on Solaris to an AIX Server? I have
the Storage Agent connecting fine to the server, but IBMtape on solaris is
not configuring the tape devices. The tapes are properly zones, as cfgadm
reports them. I am using TSM 5.2.1.0 of both ther server and storage
agent, and IBMtape 4.1.0.7.
cfgadm -al | grep tape
c4::50050763004057dc tape connected configured
unknown
c4::5005076300406085 tape connected configured
unknown
c4::50050763004064e9 tape connected configured
unknown
c4::500507630040670b tape connected configured
unknown
c4::5005076300406aeb tape connected configured
unknown
c4::50050763004f3901 tape connected configured
unknown
c4::50050763004f3902 tape connected configured
unknown
c6::5005076300405600 tape connected configured
unknown
c6::5005076300405961 tape connected configured
unknown
c6::500507630040617f tape connected configured
unknown
c6::50050763004065d1 tape connected configured
unknown
c6::50050763004072d7 tape connected configured
unknown
c6::50050763004f3903 tape connected configured
unknown
c6::50050763004f3904 tape connected configured
unknown
But after I load IBMtape, it does not find these devices, and therefore, I
get no devices in /dev/rmt which I could then use in my define path
statements on the server.
Any ideas on what I am missing?
Thanks,
Steve Roder
University at Buffalo
(spr AT buffalo DOT edu | (716)645-3564)
|