ADSM-L

Re: Don't write media

2004-11-16 09:48:11
Subject: Re: Don't write media
From: Bill Boyer <bill.boyer AT VERIZON DOT NET>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Tue, 16 Nov 2004 09:47:59 -0500
Look up the ASC/ASCQ values in the TSM Mesages manual, Appendix C. For the
ASC=15, ASCQ=01 "Mechanical Positioning Error". You might want to see if the
library itself if flagging any error messages. If TSM can't mount a volume,
it will mark that volume as unavailable, or if it's a Scratch volume, it
will make it  Private to prevent a reoccurance of the error.

Bill Boyer
DSS, Inc.

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf Of
nghiatd
Sent: Monday, November 15, 2004 7:03 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Don't write media


Dear all,

I install TSM 5.2 on Windows2K.
Backup server :  xSeries 250 8665-81Y
External Storage : HP surestore optical 220mr
I have setuped ang configured succesfully. But when I backup to optical
disk. I got error message:


11/15/2004 15:28:15   ANR0406I Session 43 started for node BACKUP (WinNT)
                       (Tcp/Ip backup(1115)).

11/15/2004 15:29:07   ANR8337I OPTICAL volume VOL002 mounted in drive
OP4.0.0.2
                       (op4.0.0.2).
11/15/2004 15:29:07   ANR1340I Scratch volume VOL002 is now defined in
storage
                       pool OPTPOOL1.
11/15/2004 15:31:30   ANR0407I Session 126 started for administrator ADMIN
                       (WinNT) (Tcp/Ip backup(1204)).

11/15/2004 15:33:20   ANR8302E I/O error on drive OP4.0.0.2 (op4.0.0.2)
                       (OP=WRITE, Error Number=2, CC=205, KEY=FF, ASC=FF,
                       ASCQ=FF, SENSE=**NONE**, Description=SCSI adapter
                       failure).  Refer to Appendix D in the 'Messages'
manual
                       for recommended action.
11/15/2004 15:34:10   ANR8943E Hardware or media error on library LB3.0.0.2
                       (OP=8401C058, CC=304, KEY=04, ASC=15, ASCQ=01,

SENSE=70.00.04.00.00.00.00.46.00.00.00.00.15.01.00.00.00-

.00.A4.B8.14.01.00.C0.00.00.00.00.00.00.00.00.00.00.00.9-

0.00.01.80.00.01.00.00.00.00.00.00.00.00.00.00.00.00.00.-

00.00.90.00.00.0D.B3.00.00.0D.B3.00.00.34.BD.00.00.34.B2-
                       .00.00.00.00.00., Description=Changer failure).
Refer to
                       Appendix D in the 'Messages' manual for recommended
                       action.
11/15/2004 15:34:10   ANR9999D asalloc.c(7693): ThreadId<39> Error 30
accessing
                       volume VOL002(4), side 1.
11/15/2004 15:34:10   ANR1411W Access mode for volume VOL002 now set to
                       "read-only" due to write error.
11/15/2004 15:34:10   ANR0523W Transaction failed for session 125 for node
                       BACKUP (WinNT) - error on output storage device.
11/15/2004 15:34:10   ANR0403I Session 125 ended for node BACKUP (WinNT).

      Have anyone met this error ?

<Prev in Thread] Current Thread [Next in Thread>