ADSM-L

Re: Server upgrade problem

2004-10-15 11:00:46
Subject: Re: Server upgrade problem
From: "Warren, Matthew (Retail)" <Matthew.Warren AT POWERGEN.CO DOT UK>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Fri, 15 Oct 2004 15:54:32 +0100
I havent used TSM on mainframe, so I hope this doesn't just cloud the
issue;

Is it vaguely possible, that as the message repository seems to be
reporting that it is old, that the messages you are seeing RE: server
level etc.. are wrong? IE: your really are uplevel, but the message from
the old repository says your not?

2p....

Matt.

_-'-_
  -|-


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Slag, Jerry B.
Sent: Thursday, October 14, 2004 7:03 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Server upgrade problem

If this was done through regular smpe maint. the executable would
probably
be in sys1.linklib on another RES (ipl) volume. Look at the dataset
names on
your production and test version for //DSMAMENG and //HLPAMENG and
//IMAGES
they should give you some idea of what kind names the installers used -
and
based on your message they should be different datasets on at least the
//DSMAMENG since that is the pointer to the messages library.

Short form - you can't get to a new version without either creating a
new
linklib/loadlib or updating an existing linklib/loadlib. If the code was
installed into the existing and active sys1.linklib you need to enter an
LLA
refresh console command and then fire or just shoot the installers cause
they are too stupid to .........

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Keene R. Hallenbeck
Sent: Thursday, October 14, 2004 12:16 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Server upgrade problem

In our normal start procedure, the SYS1.LINKLIB of the mainframe system
is
used for the exec's.  We were not given a new linklib, or loadlib,
dataset
name by the installers.  That is why I asked about DSMSERV in the
original
note because I believe there should be an new linklib, or loadlib, with
new
exec versions for the TSM v5.2 .  I am looking for some verification of
this
to proof it to the installers.




                      "Slag, Jerry B."
                      <jslag AT STATE DOT ND.U        To:
ADSM-L AT VM.MARIST DOT EDU
                      S>                       cc:
                      Sent by: "ADSM:          Subject:  Re: Server
upgrade
problem
                      Dist Stor
                      Manager"
                      <[email protected]
                      .EDU>


                      10/14/04 12:06 PM
                      Please respond to
                      "ADSM: Dist Stor
                      Manager"






Do you have a steplib pointing to your new loadlib?

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Keene R. Hallenbeck
Sent: Thursday, October 14, 2004 10:52 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Server upgrade problem

We are currently running TSM v4 r1 l3.0 on the OS390 r2.10 mainframe.
We
are attempting to upgrade to TSM v5 r2. The installation of the new
software
level was done by NYS Office for Technology, not us at DOH, so I am not
sure
of everything that was done.  They told us the installation was done,
and
DOH can start at the 'Quick Start' procedure for migrating.  We have a
small
TSM/Adstar server set up, that is used for testing the new software
before
we upgrade the production system server.  When starting the test system
for
the first time, after pointing to the new DSN's and with the 'UPGRADEDB'
parameter, the server starts with the following messages:

S ADSMT1
$HASP100 ADSMT1   ON STCINRDR
IEF695I START ADSMT1   WITH JOBNAME ADSMT1   IS ASSIGNED TO USER ADSMT1
 , GROUP OMVSGRP
$HASP373 ADSMT1   STARTED
ACF9CCCD USERID ADSMT1   IS ASSIGNED TO THIS JOB - ADSMT1
IEF403I ADSMT1 - STARTED - TIME=09.31.07 ANR5962I DSMSERV generated at
17:23:07 on Mar  2 2001.
ANR5965I Console command:
ANR0000W Message repository for language AMENG does not match program
level.
ANR0000I Message repository's compile date: Tue Jun 10 03:21:03 2003
ANR0000I Program's message timestamp:       Thu Feb  1 10:40:36 2001
 Tivoli Storage Manager for MVS
Version 4, Release 1, Level 3.0
Licensed Materials - Property of IBM
(C) Copyright IBM Corporation 1990,2003.
All rights reserved.
U.S. Government Users Restricted Rights - Use, duplication or disclosure
restricted by GSA ADP Schedule Contract with IBM Corporation.
ANR0900I Processing options file dsmserv.opt.
ANR0990I Server restart-recovery in progress.
ANR0200I Recovery log assigned capacity is 36 megabytes.
ANR0201I Database assigned capacity is 76 megabytes.
ANR0306I Recovery log volume mount in progress.
ANR0353I Recovery log analysis pass in progress.
ANR0354I Recovery log redo pass in progress.
ANR0355I Recovery log undo pass in progress.
ANR0352I Transaction recovery complete.
ANR2100I Activity log process has started.
ANR1305I Disk volume ADSMAPPL.T1.STOR.ARCH01 varied online.
ANR1305I Disk volume ADSMAPPL.T1.STOR.BACK01 varied online.
ANR1305I Disk volume ADSMAPPL.T1.STOR.BACK02 varied online.
ANR2803I License manager started.
ANR5090I TCP/IP driver ready for connection with clients on port 1502
ANR5140I HTTP (IBM) communications is listening for clients on port
1582.
ANR2560I Schedule manager started.
TSM:ADSMT1>
ANR0993I Server initialization complete.
ANR2827I Server is licensed to support Managed System for LAN for a
quantity
of 300.
ANR0916I TIVOLI STORAGE MANAGER distributed by Tivoli is now ready for
use.
Storage Management Server for MVS - Version 4, Release 1, Level 3.0
TSM:ADSMT1>

The test server starts, but with v4 r1 l3.0 of TSM.  I have not seen
much on
the 'message repository' lines in the manuals.  Could the problem be
that
the version of DSMSERV is not correct.  Any help will be appreciated.
 Thank you in advance.


___________________________ Disclaimer Notice __________________________
This message and any attachments are confidential and should only be read by 
those to whom they are addressed. If you are not the intended recipient, please 
contact us, delete the message from your computer and destroy any copies. Any 
distribution or copying without our prior permission is prohibited.

Internet communications are not always secure and therefore Powergen Retail 
Limited does not accept legal responsibility for this message. The recipient is 
responsible for verifying its authenticity before acting on the contents. Any 
views or opinions presented are solely those of the author and do not 
necessarily represent those of Powergen Retail Limited. 

Registered addresses:

Powergen Retail Limited, Westwood Way, Westwood Business Park, Coventry, CV4 
8LG.
Registered in England and Wales No: 3407430

Telephone +44 (0) 2476 42 4000
Fax +44 (0) 2476 42 5432

<Prev in Thread] Current Thread [Next in Thread>