Re: How to see TSM device driver mapping with TSM server
2004-10-10 20:16:52
I am not sure if this is what you are after but you can get the element number
by running the lbtest.exe utility.
The steps are:
1) Start lbtest.exe from dos window
2) Press 1, for Manual Test
3) Press 1: for Set device special file
4) Enter the libraries device name (eg lb1.x.x.x found in the Device Driver
section of the TSM Management Console)
5) Press 6: to Open the device
6) Press 8: to Return element count
7) Press 9: to Return All library inventory
You'll then find out the corresponding Element number for each drive
When finished:
8) Press 7: to Close the library
9) Press 99: to return to main menu
10) Press 9: to Exit lbtest
Cheers,
Gordon Woodward
Wintel Server Support
--
This e-mail may contain confidential and/or privileged information. If you are
not the intended recipient (or have received this e-mail in error) please
notify the sender immediately and destroy this e-mail. Any unauthorized
copying, disclosure or distribution of the material in this e-mail is strictly
forbidden.
|
|
|