mtlib and TSM inventory
2004-10-01 04:52:16
Hi all,
My TSM inventory shows the following for volume 002491 which is not in the
library:-
Volume Name: 002491
Storage Pool Name: DRMCOPY
Device Class Name: 3494DEV
Estimated Capacity (MB): 0.0
Pct Util: 0.0
Volume Status: Empty
Access: Unavailable
Pct. Reclaimable Space: 0.0
Scratch Volume?: No
In Error State?: No
Number of Writable Sides: 1
Number of Times Mounted: 0
Write Pass Number: 0
Approx. Date Last Written:
Approx. Date Last Read:
Date Became Pending:
Number of Write Errors: 0
Number of Read Errors: 0
Volume Location:
Last Update by (administrator): XXXXX
Last Update Date/Time: 06/03/04 15:09:54
However, mtlib show the following:-
mtlib -l /dev/lmcp0 -f /dev/rmt3 -qD
Device Data:
mounted volser.............002491
mounted category...........0000
device category............012E
device state...............Device installed in Library.
Device available to Library.
ACL is installed.
Auto Fill is enabled.
device class...............3590-E1A
extended device status.....00
I have physically checked the library and there is nothing in the drive, it is
empty.
If TSM knows the volume is not in the library, but the library thinks it is
loaded, how
do I get them back in sync?
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- mtlib and TSM inventory,
Hashim, Shukrie BSP-ISM/116 <=
|
|
|