ADSM-L

Re: storage media inaccessible? - fixed

2004-09-24 12:15:49
Subject: Re: storage media inaccessible? - fixed
From: William Rosette <Bill_Rosette AT PAPAJOHNS DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Fri, 24 Sep 2004 12:08:53 -0400
Nancy,

I just stopped and started my 3494 tape library and received the same
results.  I was thinking that the PC that controls the DB on the 3494 was
not "synced" up with the AIX SP TSM server.  I'd be interested if anybody
else has any ideas.

Thank You,
Bill Rosette
Data Center/IS/Papa Johns International
WWJD



                      Nancy Reeves
                      <Nancy.Reeves@WIC        To:       ADSM-L AT VM.MARIST 
DOT EDU
                      HITA.EDU>                cc:
                      Sent by: "ADSM:          Subject:  Re: storage media 
inaccessible? - fixed
                      Dist Stor
                      Manager"
                      <[email protected]
                      .EDU>


                      09/24/2004 11:48
                      AM
                      Please respond to
                      "ADSM: Dist Stor
                      Manager"






Rick,
        That's another good idea, but not the answer for me. All 3 tapes
look fine and move when I turn the spindle.

All is well now. I ended up halting the server and restarting. I suspect
that the library was confused and that the Init Element from turning it
off straightened it out, but the TSM software didn't get the message until
I restarted it. I was hoping to find an elegant (nondisruptive) solution,
but at least I found a solution.

Thanks Rick, Bill, David, & Doug.

Nancy Reeves
Technical Support, Wichita State University
Nancy.Reeves AT wichita DOT edu          316-978-3860
---------------------


Nancy,

I have a 3575 and have had similar problems when the tape inside the
cartridge has snapped. The cartridge gets loaded into the drive by the
library but it never comes ready. Check the cartridges out of the library,
open the access door at the end of the cartridge and have a peek inside. I
wouldn't be surprised if the tape isn't visible anymore because it has
been
pulled completely inside the cartridge. If this is the case then the
cartridges are beyond hope. You'll need to use the restore volume command
to recover the data from your copypool tapes.

Rick Saylor
 Austin Community College

<Prev in Thread] Current Thread [Next in Thread>