I tried this cmd, but all my copy pool volumes are UNAVAIL (offsite).....
any other suggestions?

Dave Nicholson
Whirlpool Corporation





"Rushforth, Tim" <TRushforth AT WINNIPEG DOT CA>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
06/07/2004 11:20 AM
Please respond to "ADSM: Dist Stor Manager"


        To:     ADSM-L AT VM.MARIST DOT EDU
        cc:
        Subject:        Re: Primary Pool and Copypool Relationship


Yes this is how TSM works.  You can have multiple copy pools for 1 Primary
Pool.

See http://msgs.adsm.org/cgi-bin/get/adsm0404/221.html for one way to delete
this data.  (This assumes that there is still domr data that you want on
Copy Pool #1)

-----Original Message-----
From: David Nicholson [mailto:David_R_Nicholson AT WHIRLPOOL DOT COM]
Sent: June 7, 2004 10:09 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Primary Pool and Copypool Relationship

Hi All,

        I moved a lot of data out of Primary Pool #1 and into Primary Pool
#
2.  Primary Pool #1 used Copy Pool #1 and Primary Pool # 2 used Copy Pool
#2.

        It appears that the Copy Pool # 1 still has the backup of this
data...which I expected.  The problem is that
it appears the data was also backed up to copy pool #2 as I moved the
data....this was not expected.

        Does this sound like expected behavior?  If so, any ideas for how
to clean up the "extra" copy in Copy Pool #1???


        Thanks!


Dave Nicholson
Whirlpool Corporation