Are you using client side compression Justin?
That can cause bottlenecking of the client CPU.
Steve.
>>> justin.case AT DUKE DOT EDU 04/06/2004 9:04:19 >>>
Aix 5.2 machine runing tsm code Client Version: Version 5, Release 1, Level
0.0
network settings are listed below. So how can I improve network
transfer rates? reason am looking to improve transfer rate is because it is
backing up almost 600GB
per night.
Thnaks
Justin
---------------------- Forwarded by Justin Case/OIT/Univ/Duke on 06/03/2004
07:02 PM ---------------------------
Justin Case <cjcase AT bremen.oit.duke DOT edu> on 06/03/2004 06:58:36 PM
To: cjcase AT bremen.oit.duke DOT edu
cc:
Subject: network-sets.log
arpqsize = 12
arpt_killc = 20
arptab_bsiz = 7
arptab_nb = 73
bcastping = 0
clean_partial_conns = 0
delayack = 0
delayackports = {}
dgd_packets_lost = 3
dgd_ping_time = 5
dgd_retry_time = 5
directed_broadcast = 0
extendednetstats = 0
fasttimo = 200
icmp6_errmsg_rate = 10
icmpaddressmask = 0
ie5_old_multicast_mapping = 0
ifsize = 256
inet_stack_size = 16
ip6_defttl = 64
ip6_prune = 1
ip6forwarding = 0
ip6srcrouteforward = 1
ipforwarding = 0
ipfragttl = 60
ipignoreredirects = 0
ipqmaxlen = 100
ipsendredirects = 1
ipsrcrouteforward = 1
ipsrcrouterecv = 0
ipsrcroutesend = 1
llsleep_timeout = 3
lo_perf = 1
lowthresh = 90
main_if6 = 0
main_site6 = 0
maxnip6q = 20
maxttl = 255
medthresh = 95
multi_homed = 1
nbc_limit = 891289
nbc_max_cache = 131072
nbc_min_cache = 1
nbc_ofile_hashsz = 12841
nbc_pseg = 0
nbc_pseg_limit = 1048576
ndp_mmaxtries = 3
ndp_umaxtries = 3
ndpqsize = 50
ndpt_down = 3
ndpt_keep = 120
ndpt_probe = 5
ndpt_reachable = 30
ndpt_retrans = 1
net_malloc_police = 0
nonlocsrcroute = 0
nstrpush = 8
passive_dgd = 0
pmtu_default_age = 10
pmtu_rediscover_interval = 30
psebufcalls = 20
psecache = 1
pseintrstack = 12288
psetimers = 20
rfc1122addrchk = 0
rfc1323 = 0
rfc2414 = 0
route_expire = 1
routerevalidate = 0
rto_high = 64
rto_length = 13
rto_limit = 7
rto_low = 1
sack = 0
sb_max = 4194304
send_file_duration = 300
site6_index = 0
sockthresh = 85
sodebug = 0
somaxconn = 1024
strctlsz = 1024
strmsgsz = 0
strthresh = 85
strturncnt = 15
subnetsarelocal = 1
tcp_bad_port_limit = 0
tcp_ecn = 0
tcp_ephemeral_high = 65535
tcp_ephemeral_low = 32768
tcp_finwait2 = 1200
tcp_init_window = 0
tcp_inpcb_hashtab_siz = 24499
tcp_keepcnt = 8
tcp_keepidle = 14400
tcp_keepinit = 150
tcp_keepintvl = 150
tcp_limited_transmit = 1
tcp_maxburst = 0
tcp_mssdflt = 512
tcp_nagle_limit = 65535
tcp_ndebug = 100
tcp_newreno = 1
tcp_nodelayack = 0
tcp_pmtu_discover = 1
tcp_recvspace = 65550
tcp_sendspace = 65550
tcp_timewait = 1
tcp_ttl = 60
thewall = 1048576
udp_bad_port_limit = 0
udp_ephemeral_high = 65535
udp_ephemeral_low = 32768
udp_inpcb_hashtab_siz = 24499
udp_pmtu_discover = 1
udp_recvspace = 42080
udp_sendspace = 9216
udp_ttl = 30
udpcksum = 1
use_isno = 1
***********************************************************************************
This email, including any attachments sent with it, is confidential and for the
sole use of the intended recipient(s). This confidentiality is not waived or
lost, if you receive it and you are not the intended recipient(s), or if it is
transmitted/received in error.
Any unauthorised use, alteration, disclosure, distribution or review of this
email is prohibited. It may be subject to a statutory duty of confidentiality
if it relates to health service matters.
If you are not the intended recipient(s), or if you have received this email in
error, you are asked to immediately notify the sender by telephone or by return
email. You should also delete this email and destroy any hard copies produced.
***********************************************************************************
|
