While TSM is trying to migrate from one the disk storage pool to tape
storage pool the "q request" returned:

ANR8346I QUERY REQUEST: No requests are outstanding.

and the "q mount" continues to show:

ANR2034E QUERY MOUNT: No match found using this criteria.

Should not the "QUERY REQUEST" display that there is a pending mount request?

> Hi
>
> Do a "q request" to see wether or not you have a mount request in TSM.
> Normally with a tape library of type manual, TSM will issue a mount
> request for you to manually mount the tape in the tape drive. After you
> have mounted it, you should execute "reply X" where X is the mount request
> number.
>
> If you dont do a reply, q mount will not return the tape, as TSM is
> waiting for you to reply to the mount request.
>
> Best Regards
>
> Daniel Sparrman
> -----------------------------------
> Daniel Sparrman
> Senior Storage Consultant
> Exist i Stockholm AB
> Propellervägen 6B
> 183 62 TÄBY
> Växel: 08 - 754 98 00
> Mobil: 070 - 399 27 51
>
>
>
> "creimer AT impactow.com DOT br" <creimer AT IMPACTOW.COM DOT BR>
> Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
> 2004-05-27 08:44
> Please respond to
> "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
>
>
> To
> ADSM-L AT VM.MARIST DOT EDU
> cc
>
> Subject
> Re: Insufficient number of mount points
>
>
>
>
>
>
> Even with a tape into the tape drive the "q mount" returns:
>
> ANR2034E QUERY MOUNT: No match found using this criteria.
>
>
>> issue q mount
>>
>> -----Original Message-----
>> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf 
>> Of
>> creimer AT impactow.com DOT br
>> Sent: Wednesday, May 26, 2004 2:09 PM
>> To: ADSM-L AT VM.MARIST DOT EDU
>> Subject: Re: Insufficient number of mount points
>>
>>
>> There is only one drive installed but I'm not sure if there is another
>> process using it... how can I be sure there isn't another process using
>> the drive?
>>
>>
>>> How many drives do you  have.  Check and see what else is using the
>>> drives.  The message usually means that all drives are being used.
>>>
>>> -----Original Message-----
>>> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf 
>>> Of
>>> creimer AT impactow.com DOT br
>>> Sent: Wednesday, May 26, 2004 1:38 PM
>>> To: ADSM-L AT VM.MARIST DOT EDU
>>> Subject: Insufficient number of mount points
>>>
>>>
>>> Hi,
>>>
>>> I'm very new to TSM and when I'm testing the migration process TSM is
>>> showing the following message:
>>>
>>> ANR1134W Migration terminated for storage pool BACKUPPOOL -
> insufficient
>>> number of mount points available for removable media.
>>>
>>> TSM is trying to migrate data from a disk to a tape storage pool.
>>>
>>> The media is a DDS4 tape device and TSM version is 5.2.2-4 in a RedHat
>>> 2.1.
>>>
>>> What could be wrong?
>>>
>>> Thanks in advance!
>>>
>>>
>>> --------------------------------------------
>>> Reimer
>>> creimer AT impactow.com DOT br / www.quicksoft.com.br
>>> Fone: (47) 231-6500 - Fax: (47) 231-6515
>>>
>>
>>
>> --------------------------------------------
>> Reimer
>> creimer AT impactow.com DOT br / www.quicksoft.com.br
>> Fone: (47) 231-6500 - Fax: (47) 231-6515
>>
>
>
> --------------------------------------------
> Reimer
> creimer AT impactow.com DOT br / www.quicksoft.com.br
> Fone: (47) 231-6500 - Fax: (47) 231-6515
>


--------------------------------------------
Reimer
creimer AT impactow.com DOT br / www.quicksoft.com.br
Fone: (47) 231-6500 - Fax: (47) 231-6515