Re: No match found...
2004-04-13 12:46:52
I would change the Tapepool tapes to Access=readwrite the use the move
data command to move the data off those volumes. This would make the
data on them available for the reclamation process.
You may want to use the move data command to move the data off the
archive pool and offsite pool to other tapes as well. Remember when
moving data from a tape that is not in the tape library to use the
recons parameter in the move data command.
>>> SDinelle AT CANADELLE DOT COM 4/13/04 12:29:07 PM >>>
If damaged files are on those tapes, what next? I assuming that I have
to
consolidate this tape (good files) with another tape?
Etienne Brodeur <ebrodeur AT SERTI DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
2004-04-13 11:35
Please respond to "ADSM: Dist Stor Manager"
To: ADSM-L AT VM.MARIST DOT EDU
cc:
Subject: Re: No match found...
Hi Stephan,
You should not have tapes in OFFPOOL that are unavailable and
especially not in TAPEPOOL! That means the tapes containing your data
that needs to be reclaimed is not available to TSM, since those
volumes
are unavailable. If you check your activty log you'll see messages
saying
'Volume XXXX required for space reclamation. Volume is unavailable'
Those tapes probably have write errors which is why they are
unavaible.
You should check those 'TAPEPOOL' volumes to be sure they are in the
library and maybe set them to READONLY and then run an audit on them
to
see if there really are damaged files there.
Etienne Brodeur
Serti Informatique
Stephan Dinelle <SDinelle AT CANADELLE DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
04/13/2004 10:24 AM
Please respond to
"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
To
ADSM-L AT VM.MARIST DOT EDU
cc
Subject
Re: No match found...
Here is the result of the Q VOL ACC=UNAVAIL command
Tivoli Storage Manager
Command Line Administrative Interface - Version 4, Release 2, Level
1.0
ANS8000I Server command: 'q vol acc=unavail'
Volume Name Storage Device Estimated Pct
Volume
Pool Name Class Name Capacity Util
Status
(MB)
------------------------ ----------- ---------- --------- -----
--------
099ACYL1 ARCHIVEPOOL LTOCLASS 141,962.7 100.0
Full
101ACYL1 OFFPOOL LTOCLASSO- 190,734.0 4.4
Filling
FF
104ACYL1 OFFPOOL LTOCLASSO- 190,734.0 1.1
Filling
FF
139ACYL1 TAPEPOOL LTOCLASS 190,734.0 0.7
Filling
142ACYL1 TAPEPOOL LTOCLASS 162,534.4 5.7
Full
147ACYL1 TAPEPOOL LTOCLASS 190,734.0 0.4
Filling
162ACYL1 OFFPOOL LTOCLASSO- 190,734.0 18.2
Filling
FF
175ACYL1 ARCHIVESPE- LTOCLASS 190,734.0 6.4
Filling
CIAL
ANS8002I Highest return code was 0.
Bill Boyer <bill.boyer AT VERIZON DOT NET>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
2004-04-13 10:06
Please respond to "ADSM: Dist Stor Manager"
To: ADSM-L AT VM.MARIST DOT EDU
cc:
Subject: Re: No match found...
Are you reclamation tasks completing successfully? Also, did anyone
change
the reuse delay of the OFFPOOL storage pool? Are the tapes in a
PENDING
state?
I would check to make sure your reclamation tasks are running to
completion.
Maybe check to see if you have any onsite tapes that are unavailable?
Q
VOL
ACC=UNAVAIL. That would explain why reclamation wasn't completing.
Bill Boyer
DSS, Inc.
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf
Of
Stephan Dinelle
Sent: Tuesday, April 13, 2004 9:31 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: No match found...
Hi,
It will be almost 2 weeks now that our TSM server (version 5, release
1,
Level 6.4 for Windows) do not retrieving any "storage=offpool,
access=offsite"...
We normally had an average of 1 to 2 tapes every day that were
returning
from the offsite storage.
Here is the command:
q vol stg=offpool access=offsite status=empty
Nothing was changed or modified for the last 6 months.
Any clue(s) where to check and what to check?
N.B. IBM Tape library 3583
Thanks
|
|
|