Re: Notmountable tapes being requested
2004-03-18 15:29:57
Here's that output - I'm not relabeling anything just yet ;-)
Volume Name: 00025-L1
Storage Pool Name: COPYPOOL
Device Class Name: LTOCLASS
Estimated Capacity (MB): 102,400.0
Pct Util: 46.0
Volume Status: Filling
Access: Read/Write
Pct. Reclaimable Space: 8.5
Scratch Volume?: Yes
In Error State?: No
Number of Writable Sides: 1
Number of Times Mounted: 2
Write Pass Number: 1
Approx. Date Last Written: 03/17/2004 06:17:04
Approx. Date Last Read: 03/17/2004 05:15:19
Date Became Pending:
Number of Write Errors: 0
Number of Read Errors: 0
Volume Location: Fire Safe Storage
Volume is MVS Lanfree Capable : No
Last Update by (administrator): ADMIN
Last Update Date/Time: 03/18/2004 13:06:48
Mike Bantz
Systems Administrator
Research Systems, Inc
4990 Pearl East Circle
Boulder, CO 80301
(303) 413-3999 direct
(303) 786-9909 fax
http://www.researchsystems.com
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Zoltan Forray/AC/VCU
Sent: Thursday, March 18, 2004 11:23 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Notmountable tapes being requested
When you do a "Q VOL 00025-L1 F=D", what does it say is the LOCATION/STATUS
and such ?
"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU> wrote on 03/18/2004
01:17:00 PM:
> I'm trying to recover from a bunch of hardware errors on our tape
library,
> and issued the following to get a good backup for DRM:
>
> backup stg tapepool copypool wait=no
>
> So, it goes ahead and asks for volume 00025-L1, which is currently in
> a NOTMOUNTABLE state, sitting in a fire safe. My question is this:
> why,
when
> I've told TSM that this volume is not mountable, would the system need
this
> as an output volume? I've got plenty of scratch volumes in there, as
well.
>
> TIA,
>
> Mike Bantz
> Systems Administrator
> Research Systems, Inc
|
|
|