Miles,
I think you need to give a little more info as the two scripts sound like
local scripts to yourselves. You will need to give the content of your
scripts to be useful...
eg:
query script q_proc_stats f=d
query script q_ses_stats f=d
... and look at what follows "Command:"
Many thanks
Andy Wilcox
UNIX Systems Administrator
Aquila Networks
-----Original Message-----
From: Miles Purdy [mailto:PURDYM AT FIPD.GC DOT CA]
Sent: 03 March 2004 21:03
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Antwort: Re: 2 LTO-Drives Load-Balancing
Just an aside, as the processes are running, type this command into TSM:
> run q_proc_stats
It will show the transfer rate of each process. There is also a 'run
r_ses_stats'.
Miles
>>> Patrick.Rainer AT ARZ.CO DOT AT 03-Mar-04 8:35:47 AM >>>
Hello again
Sorry. Maybe my question can be wrong interpreted.
For example:
I have two migration processes from disk stgpool to tape drive.
My diskdrives offer about 20MB/s.
The question:
Is the transferrate of the diskdrives split up for the tape drives to 50%
for each drive? (10MB/s per drive) (Also means 50% per process)
Or uses one drive the full transferrate which is possible for one drive
(15MB/s) and the other drive only gets the rest (5MB/s)?
My problem -> 5MB/s means permanent Stop-and-Go-mode for one drive.
I would like to hear, that the TSM-server splits up the transferrate. This
means each migration process/job uses 10MB/s.
Thank you.
Best regards
Patrick
Karel Bos <Karel.Bos AT NUON DOT COM>
Gesendet von: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
03.03.2004 15:04
Bitte antworten zu
"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
An
ADSM-L AT VM.MARIST DOT EDU
Kopie
Thema
Re: 2 LTO-Drives Load-Balancing
TSM is not load-balancing on a drive level. TSM will use multiple drives
on
a job level.
Regards,
Karel
-----Oorspronkelijk bericht-----
Van: Patrick Rainer [mailto:Patrick.Rainer AT ARZ.CO DOT AT]
Verzonden: woensdag 3 maart 2004 14:41
Aan: ADSM-L AT VM.MARIST DOT EDU
Onderwerp: 2 LTO-Drives Load-Balancing
Hello TSM users, a.a.o.o
I searched the mailinglist archive and the discussion forum, but did not
found a solution for my problem.
We are using TSM 5.2.2.1 for library evaluation. We are testing a HP
MSL5030 with two LTO1 drives.
Our disks provide a datarate of about 20MB/s.
LTO1 supports a datarate of maximum 15MB/s and starts STOP-and-GO-Mode at
about 7MB/s.
My question:
Is the TSM-Server balancing the load of the two drives?
That means: Every drive gets about 10MB/s
Or gets one drive 15 MB/s and the other only 5 MB/s?
We tried to analyze this load, but it isn't that simple. The only way is
to calculate the load out of the transfered bytes and the needed time.
How is it possible to monitor the load of one drive?
(HP told us, we shoud check if the LED's are blinking slow or fast ?!?)
Any ideas??
Best regards
Patrick
****************************************************************************
************************
Confidentiality: This e-mail and any files transmitted with it are
confidential and intended solely for the use of the individual or entity to
whom they are addressed. If you have received this e-mail in error, use of
this information (including disclosure, copying or distribution) may be
unlawful. Please notify postmaster AT aquila-networks.co DOT uk. and delete the
message immediately.
Security: Internet e-mail is not a 100% secure communications medium.
Viruses: This e-mail (and any attachments) has been checked (using Sophos
Sweep 3.68 + patches) and found to be clean from any virus infection before
leaving.
Therefore neither Aquila Networks Services Ltd nor Midlands Electricity plc
or any of their group undertakings (as defined by the Companies Act 1989)
(together referred to as the "Companies") accept legal responsibility for
this message or liability for the consequences of any computer viruses which
may have been transmitted by this e-mail.
Monitoring: All electronic communications with the Companies may be
monitored in accordance with the UK Regulation of Investigatory Powers Act,
Lawful Business Practice Regulations, 2000. If you do not consent to such
monitoring, you should contact the sender of this e-mail.
Aquila Networks Services Limited,
Registered office: Whittington Hall, Whittington, Worcester, WR5 2RB
Registered in England and Wales number 3600545
This e-mail may be sent on behalf of any of the Companies.
****************************************************************************
************************
****************************************************************************************************
Confidentiality: This e-mail and any files transmitted with it are confidential
and intended solely for the use of the individual or entity to whom they are
addressed. If you have received this e-mail in error, use of this information
(including disclosure, copying or distribution) may be unlawful. Please notify
postmaster AT aquila-networks.co DOT uk. and delete the message immediately.
Security: Internet e-mail is not a 100% secure communications medium.
Viruses: This e-mail (and any attachments) has been checked (using Sophos Sweep
3.74 + patches) and found to be clean from any virus infection before leaving.
Therefore neither Aquila Networks Services Ltd nor Midlands Electricity plc or
any of their group undertakings (as defined by the Companies Act 1989)
(together referred to as the "Companies") accept legal responsibility for this
message or liability for the consequences of any computer viruses which may
have been transmitted by this e-mail.
Monitoring: All electronic communications with the Companies may be monitored
in accordance with the UK Regulation of Investigatory Powers Act, Lawful
Business Practice Regulations, 2000. If you do not consent to such monitoring,
you should contact the sender of this e-mail.
Aquila Networks Services Limited,
Registered office: Whittington Hall, Whittington, Worcester, WR5 2RB
Registered in England and Wales number 3600545
This e-mail may be sent on behalf of any of the Companies.
****************************************************************************************************
|
