Hi List,

I have two ADIC Scalar100 tape libraries, called Scalar100 and Scalar101,
both attached to the same TSM Intel NT4 Server... Not ideal, but cheaper
than buying a bigger library.

I am not sure how best to configure the element numbers... does TSM
internally refer to a slot by library/element or just by element?   If the
latter, will I have to use a range outside of the prescribed 4096-4156?

I know that the low level addressing is by device id (LB0.0.0.1), but I just
want to ensure that the home_element being duplicated in libvolumes is not
going to cause any problems further down the line (other than my home made
reporting).

Your words of wisdom will be fully appreciated.

Best Regards

Tony Morgan
Fortis Bank UK

============================================================

This e-mail and any files transmitted with it, are confidential and
intended solely for the use of the addressee. The content of this
e-mail may have been changed without the consent of the originator.
The information supplied must be viewed in this context. If you have
received this e-mail in error please notify our Helpdesk by
telephone on +44 (0) 20-7444-8444. Any use, dissemination,
forwarding, printing, or copying of this e-mail or its attachments is
strictly prohibited.