Re: LTO1 and LTO2 drives in a 3584
2004-02-06 08:57:30
I just set up our two new LTO2-drives in an 3584-expantion frame. We
previously had the base-frame and four LTO1 drives. What I did was:
o connect hardware
o run cfgmgr
o define drives (DEFINE DRIVE 3584LTO TAPE4)
o define paths (DEFINE PATH TSM TAPE4 SRCTYPE=SERVER \
DESTTYPE=DRIVE LIBRARY=3584LTO DEVICE=/dev/rmt4)
o define devclass (DEFINE DEVCLASS 3584LTO2 DEVTYPE=LTO \
FORMAT=ultrium2c MOUNTLIMIT=DRIVES \
MOUNTWAIT=60 MOUNTRETENTION=60 PREFIX=ADSM
LIBRARY=3584LTO
o define new storage pool to use this devclass
o label new tapes, LABELSource=barcode
o check them in
And it works! Anybody see anything else I should have done?
-jf
|
|
|