Re: Upgrade TSM over HPUX 11.0 4.2.2.13 to 5.1.5
2003-10-22 11:51:55
I did not swremove anything in my last upgrade from 4.2.3.2 to 5.1.6.0,
5.1.6.5, and now 5.1.7.2. I just double checked my upgrade word document to
verify this.
I am working with support on a HIGH CPU (80%-90% per drive) issue (Since
5.1.6.5) using the TSM Tape Device Driver, so If I were you I would test
that a bunch (and test it again). I have regressed to the HP stape device
driver to eliminate the pain of the high CPU usage. I only use the TSM Tape
Device Driver to get at the converted data.
Bill Slaughter
Tupperware
407-826-4580
-----Original Message-----
From: Juan Manuel Lopez Azañon [mailto:jmlopez AT NNE DOT ES]
Sent: Wednesday, October 22, 2003 6:07 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Upgrade TSM over HPUX 11.0 4.2.2.13 to 5.1.5
Hi all.
I need urgent help.
I am NOW upgrading from TSM 4.2.2.13 to 5.1.5 over HPUX 11.0.
I should remove the old version 4.2.2.13 before install new 5.1.5. So, my
"swlist -l fileset" exit show there are TSM 4.2.0.0 ( only license ) and
TSM 4.2.2.13 ( all the server ).
Should I remove all TSM 4.2.0.0 and 4.2.2.13 software before install
5.1.5.0 ?
Please Help.
Thanks in advance.
Juan Manuel.
|
|
|