It worked, thank you very much david.
Thanks,
Desalegne Guangul
Regional Occupational Health
1800 Harrison St. 21st Floor
510-625-3038 or tieline 8/428-3038
David E Ehresman <deehre01 AT LOUISVILLE DOT EDU>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
09/29/2003 05:50 AM
Please respond to "ADSM: Dist Stor Manager"
To: ADSM-L AT VM.MARIST DOT EDU
cc:
Subject: Re: can't see new volume in the volume Inventory list
ANR8941W The volume from slot-element element-address in drive drive name
in
library library name is blank.
Explanation: The volume in the slot is not labelled and is blank.
System Action: The volume is skipped, and processing continues with the
next
available slot. If the volume is checked in, it is removed from the
inventory.
User Response: Label the volume using LABEL LIBVOL, and check it in using
CHECKIN LIBVOL.
*--
Sounds like you need to do a label libvol on those new tapes.
David
>>> Desalegne.T.Guangul AT KP DOT ORG 9/26/2003 5:52:39 PM >>>
David you are right the check in did not work. I didn't get the message
like "ANR8431I CHECKIN LIBVOLUME process completed for library
3494; 82 volume(s) found.". However I got that kind of message when I
checkin an existing tape. Anyway, the tapes where in the i/o station
(exit/entry port of the library) and
the tapes are all new with new set of barcode which we never used before.
I took your suggestion and run the audit library ltolib command but it
didn't list the new tapes but here is the out put from the log.
09/26/2003 13:52:50 ANR0609I AUDIT LIBRARY started as process 40.
09/26/2003 13:56:34 ANR8941W The volume from slot-element 4100 in drive
DR1 (mt2.1.0.4) in library LTOLIB is blank
09/26/2003 14:02:22 ANR8941W The volume from slot-element 4106 in drive
DR1 (mt2.1.0.4) in library LTOLIB is blank
09/26/2003 14:06:17 ANR8941W The volume from slot-element 4110 in drive
DR1 (mt2.1.0.4) in library LTOLIB is blank.
09/26/2003 14:07:35 ANR8461I AUDIT LIBRARY process for library LTOLIB
completed successfully.
09/26/2003 14:07:35 ANR0985I Process 40 for AUDIT LIBRARY running in the
BACKGROUND completed with completion state SUCCESS at 14:07:35.
Thanks again
Desalegne Guangul
Regional Occupational Health
1800 Harrison St. 21st Floor
510-625-3038 or tieline 8/428-3038
David E Ehresman <deehre01 AT LOUISVILLE DOT EDU>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
09/26/2003 05:19 AM
Please respond to "ADSM: Dist Stor Manager"
To: ADSM-L AT VM.MARIST DOT EDU
cc:
Subject: Re: can't see new volume in the volume Inventory
list
It sounds like your checkin did not work. Where were the tapes when you
did the checkin? In the library or in the i/o station? Did you get a
message like "ANR8431I CHECKIN LIBVOLUME process completed for library
3494; 82 volume(s) found." (Do a "q actlog msgno=8431 begind=-3") If
tsm thinks the tape is in the library, it should show up in a "q
libvol". You might also want to do a "audit library".
A volume does not have to be physical present to be defined to a
storage pool. That's why your def vol worked. And it then showed empty
because it was now defined as a private vol that had nothing on it.
David Ehresman
University of Louisville
>>> Desalegne.T.Guangul AT KP DOT ORG 9/25/2003 5:34:25 PM >>>
I just added new scratch tapes to the 3583 library using the following
command "checkin libvolume ltolib search=yes status=scratch
checklabel=barcode". Tapes checkin went OK with no error but I can't
seem to see the new volume in the volume inventory list. Then I try
to
define one of the volume to offsite_tapepool and still didn't show up
in
the volume inventory list however it showed up when I used q vol
command
with the volume status empty rather than scratch or private.
Can someone please explain to me why is this happening or give me
direction how to fix this. I have read the TSM Administrator's Guide
book
on this topic but couldn't find any solutions for my problems.
Please Help!!!!
here is the inventory list:
Library Name Volume Name Status Owner Last Use
Home
Element
------------ ----------- ---------- ---------- ---------
------------
LTOLIB 636AENL1 Private Data
4,096
LTOLIB 640AENL1 Private Data
4,101
LTOLIB 641AENL1 Private Data
4,103
LTOLIB 643AENL1 Private Data
4,099
LTOLIB 644AENL1 Private Data
4,097
LTOLIB 646AENL1 Private Data
4,104
LTOLIB 647AENL1 Scratch
4,105
LTOLIB 648AENL1 Scratch
4,102
LTOLIB 649AENL1 Private Data
4,107
LTOLIB 650AENL1 Scratch
4,108
LTOLIB 651AENL1 Private Data
4,109
LTOLIB 653AENL1 Private Data
4,111
LTOLIB CLEANV1 Cleaner
4,098
Here is query volume out put :
Volume Name Storage Device Estimated Pct
Volume
Pool Name Class Name Capacity Util
Status
(MB)
------------------------ ----------- ---------- --------- -----
--------
636AENL1 OFFSITE_TA- LTOCLASS 215,573.3 98.9
Filling
PEPOOL
640AENL1 ONSITE_POOL LTOCLASS 239,003.9 44.0
Full
641AENL1 ONSITE_POOL LTOCLASS 229,519.4 40.7
Full
642AENL1 OFFSITE_TA- LTOCLASS 257,904.5 59.6
Full
PEPOOL
643AENL1 ONSITE_POOL LTOCLASS 204,800.0 30.2
Filling
644AENL1 ONSITE_POOL LTOCLASS 224,730.6 14.1
Full
645AENL1 OFFSITE_TA- LTOCLASS 344,941.3 0.0
Full
PEPOOL
646AENL1 ONSITE_POOL LTOCLASS 223,572.0 13.7
Full
649AENL1 ONSITE_POOL LTOCLASS 471,261.5 49.4
Full
651AENL1 ONSITE_POOL LTOCLASS 201,789.7 13.2
Full
652AENL1 OFFSITE_TA- LTOCLASS 293,477.8 90.3
Full
PEPOOL
653AENL1 ONSITE_POOL LTOCLASS 215,212.0 95.2
Filling
654AENL1 OFFSITE_TA- LTOCLASS 300,773.5 87.4
Full
PEPOOL
655AENL1 OFFSITE_TA- LTOCLASS 0.0 0.0
Empty
PEPOOL
Thank you
Desalegne
Regional Occupational Health
Desalegne.T.Guangul AT kp DOT org
|