Here you go. A search on nss volumes on search.adsm.org will turn this
up rather quickly.

Novell's TID 10065605 and patch NW6SMS1A.EXE are needed. In particular,
you need the following entry in the smsrun.bas file: nlmArray =
Array("SMDR", "TSA600 /cluster=off", "TSAPROXY")in order for TSM to
recognize the clustered volumes.


Rowan O'Donoghue wrote:
>
> Hi all!
>
> I have a customer who has just implemented Netware 6.0 and the TSM 5.2
> client. Everything seems to be ok apart from the fact that there are SAN
> volumes which are assigned to the Netware 6 server (filespace called
> DATA01:) which are not recognised by the TSM client. the SYS: volume is
> being picked up no problem. Even if I try and perform an INC DATA01:\ it
> comes back telling me that the filespace is invalid.
>
> Anyone have the same problem?
>
> All the Netware 5 servers with the TSM 5.1 client are ok - then again, I
> dont have any SAN attached volumes on these servers.
>
> regards,
>
> Rowan O'Donoghue
> Technical Services Manager
> Unitech Systems
> Bracken Business Park
> Bracken Road
> Sandyford Industrial Estate
> Dublin 18.
>
> Tel:  + 353 - 1 - 2942300
> Fax: + 353 - 1 - 2942319
> www.unitech-ie.com

--
Jim Kirkman
AIS - Systems
UNC-Chapel Hill
966-5884