The message directs to Appendix D but actually some info is in Appendix C.
In section "Common values for ASC and ASCQ codes" you can find:
0x4B  0x00  Data phase error

This confirms you have problems reading the data. I would bet when you
installed the windoze you have forgotten that little MAXSGLIST thingy for
the FC HBA.

Zlatko Krastev
IT Consultant






"Coats, Jack" <Jack.Coats AT BANKSTERLING DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
07.08.2003 08:23
Please respond to "ADSM: Dist Stor Manager"


        To:     ADSM-L AT VM.MARIST DOT EDU
        cc:
        Subject:        Errors during a DB restore?


This is what I get when using DRM to restore my database.
My version of TSM is no longer supported, and it works when done from a
base install, but I am having trouble getting it to restore the database
from
a tape.

The library and drive seem to work OK otherwise.  And I can't seem to
determine what kind of error that the drive is saying it is having (other
than a read error).  But this is the second DB backup tape it could not
read.

Suggestions?
... Jack


5698-TSM (C) Copyright IBM Corporation 1999,2001. All rights reserved.
U.S. Government Users Restricted Rights - Use, duplication or disclosure
restricted by GSA ADP Schedule Contract with IBM Corporation.

ANR8200I TCP/IP driver ready for connection with clients on port 1500.
ANR0200I Recovery log assigned capacity is 3072 megabytes.
ANR0201I Database assigned capacity is 15752 megabytes.
ANR4600I Processing volume history file volhist.out.
ANR4620I Database backup series 664 operation 0 device class LTOCLASS1.
ANR4622I   Volume 1: 227ACBL1.
ANR4634I Starting point-in-time database restore to date 08/06/2003
05:49:16.
ANR8337I LTO volume 227ACBL1 mounted in drive TAPE0 (MT0.0.0.2).
ANR1363I Input volume 227ACBL1 opened (sequence number 1).
ANR4646I Database capacity required for restore is 15752 megabytes.
ANR4638I Restore of backup series 664 operation 0 in progress.
ANR8302E I/O error on drive TAPE0 (MT0.0.0.2) (OP=READ, Error Number=1235,
CC=0,

KEY=2B, ASC=4B, ASCQ=00,
SENSE=F0.00.2B.00.00.80.00.1C.00.00.00.00.4B.00.00.00.-
10.50.00.00.00.01.20.20.20.20.20.20.20.00.00.00.07.BB.00.00.00.00.00.00.00.0
0.0-

0.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00
.00-

.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.
00.-

00,
Description=An undetermined error has occurred).  Refer to Appendix D in
the
'Messages' manual for recommended action.
ANR4572E Database restore terminated - excessive read errors encountered.
ANR1364I Input volume 227ACBL1 closed.
ANR8468I LTO volume 227ACBL1 dismounted from drive TAPE0 (MT0.0.0.2) in
library
LB6.0.0.2.