Re: oops forgot the error message.
2003-06-23 09:18:11
Anderson/Group -
# lsdev -Cc tape
rmt0 Available 1P-08-00-0,0 4.0 GB 4mm Tape Drive
rmt1 Available 1P-08-00-2,0 4.0 GB 4mm Tape Drive
smc0 Available 1P-08-00-3,0 IBM 7336 Tape Medium Changer
# lsdev -Cc adsmtape
mt0 Available 1P-08-00-0,0 Tivoli Storage Manager Tape Drive
mt1 Available 1P-08-00-2,0 Tivoli Storage Manager Tape Drive
#
I used the Webgui to define the library. But nowhere on that panel does it ask
for any scsi ID or anything. Just a Library name and if it's shared or not.
Thanks again everyone.
Scott
They show up here.. But when I try to install the
Quoting "Anderson F. Nobre" <afnobre AT UOL.COM DOT BR>:
> Scott,
>
> Are you using the TSM SCSI Device Driver?
> If yes, what's the target and LUN that you are using to define the library
> device?
> Can you type the following commands and show us the output?
> # lsdev -Cc tape
> # lsdev -Cc adsmtape
>
> Regards,
>
> Anderson
>
> ----- Original Message -----
> From: "Scott Figgins" <scottf AT FIG.HOMEIP DOT NET>
> To: <ADSM-L AT VM.MARIST DOT EDU>
> Sent: Monday, June 23, 2003 12:46 AM
> Subject: oops forgot the error message.
>
>
> I'm getting this error in my Server log on AIX 5.1 with TSM 5.1.6.5 after
> defining a 7336-205 4mm Tape library. Any ideas? IBM says this library is
> supported in the BASE codeset.
>
> 06/22/03 22:54:26 ANR8843E Initialization failed for SCSI library
> AUTOLIB1 -
> the library will be inaccessible.
> 06/22/03 22:54:26 ANR8441E Initialization failed for SCSI library
> AUTOLIB1.
>
>
>
> Any help is appreciated.
> Scott Figgins
> IBM Cate
> ScottF AT fig.homeip DOT net
>
> -------------------------------------------------
> This mail sent through IMP: http://horde.org/imp/
>
-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/
|
|
|