My definitions of drive devices are OK, TSM server was already in production
and I use mtx.x.x.x as usual in W2K.
Tomas
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On
> Behalf Of Michael Swinhoe
> Sent: Monday, June 09, 2003 4:35 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: Restore DB problem
>
>
> I got the same error when I was doing a DB restore for one of our W2K
> Library clients. The issues was I had define the device name using the
> /dev/mt0.0.0.n. In W2K the device name does not need the (/dev), as that
> is a AIX definition.
>
> Mike.
>
> Regards,
> Michael Swinhoe
> Storage Management Group
> Zurich Financial Services
> IE-mail: mailto:Mike.Swinhoe AT UK.Zurich DOT com
>
>
>
>
> "Henschell, John"
>
> <john.henschell@TH To:
> ADSM-L AT VM.MARIST DOT EDU
> OMSON.COM> cc:
>
> Sent by: "ADSM: Subject: Re:
> Restore DB problem
> Dist Stor Manager"
>
> <[email protected].
>
> EDU>
>
>
>
>
>
> 09/06/2003 13:43
>
> Please respond to
>
> "ADSM: Dist Stor
>
> Manager"
>
>
>
>
>
>
>
>
> Tomas,
>
> I saw these same errors setting up a TSM 5.2 server in an AIX environment
> going to a STK 9310 using Gresham EDT software. I could do
> queries but not
> read/write to any tapes. My problem was, after I defined the library I
> needed to run the define path command;
>
> >define path tsmservername stklibraryname srctype=external
> desttype=library
> externalmanager=/usr/lpp/dtelm/bin/elm
>
> The externalmanager path will be different. I hope this helps
>
> John Henschell
>
> -----Original Message-----
> From: Toma? Hrouda Ing. [mailto:throuda AT HTD DOT CZ]
> Sent: Monday, June 09, 2003 7:34 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Restore DB problem
>
>
> Hi all,
>
> I have a problem with restore DB from external library STK9310 PowderHorn
> managed by Gresham EDT on W2000 TSM server. This is restore of TSM server
> on
> the same machine with volume history file and devconfig file
> enabled. I did
> it many times successfuly with other libraries (almost local SCSI
> connected). I prepared DB and RL volumes the same size and location as
> original by DSMSERV FORMAT command and try to do restore DB (DSMSERV
> RESTORE
> DB TODATE=date). This is important part of output:
>
> ANR7800I DSMSERV generated at 09:17:48 on Nov 5 2002.
>
> Tivoli Storage Manager for Windows
> Version 5, Release 1, Level 5.2
>
> :
> :
>
> 5698-ISE (C) Copyright IBM Corporation 1999,2002. All rights reserved.
> U.S. Government Users Restricted Rights - Use, duplication or disclosure
> restricted by GSA ADP Schedule Contract with IBM Corporation.
>
> ANR8200I TCP/IP driver ready for connection with clients on port 1500.
> ANR0200I Recovery log assigned capacity is 200 megabytes.
> ANR0201I Database assigned capacity is 1000 megabytes.
> ANR4600I Processing volume history file volhist.out.
> ANR4620I Database backup series 90 operation 0 device class STKINCCEAGLE.
> ANR4622I Volume 1: EH1143.
> ANR4634I Starting point-in-time database restore to date 06/03/2003
> 15:00:00.
> ANR0300I Recovery log format started; assigned capacity 200 megabytes.
> ANR9999D asvolmnt.c(3214): ThreadId<12> Unknown result code (132) from
> pvrOpen.
> ANR9999D icstream.c(1631): ThreadId<12> Error 87 opening input stream.
> ANR9999D icrest.c(2076): ThreadId<0> Rc=6 reading header record.
> ANR2032E RESTORE DB: Command failed - internal server error detected.
>
> Environment:
> TSM server 5.1.5.2 on W2000, Gresham EDT controled library STK9310 with 6x
> STK9840 FC drives, virtualized through SN/6000. I see all drives
> in system,
> Gresham is running and working good (I can do mounts, query ..etc).
>
> Do anybody have some idea what is the problem, or would I open PMR on IBM
> support?
>
> Many thanks
>
> Tomas Hrouda
> Storage Specialist
> HTD s.r.o. Praha
> CZECH REPUBLIC
> throuda AT htd DOT cz
>
>
>
>
>
>
> -------------------------------------------------------------------------
>
> The information contained in this message is confidential and may be
> legally privileged. If you are not the intended recipient, please do not
> read, copy or otherwise use it and do not disclose it to anyone else.
> Please notify the sender of the delivery error and then delete the
> message from your system.
>
> Any views or opinions expressed in this email are those of the
> author only.
>
> Communications will be monitored regularly to improve our service and for
> security and regulatory purposes.
>
> Thank you for your assistance.
>
> -------------------------------------------------------------------------
|
