Frank,
I think you brought an interesting point about your fibre IP
connectivity as I plan to redesign my SAN with TSM server on AIX. Could
you share a little bit more about how to use IP through HBA to connect
to TSM server? This is new to me because I desinged to have separate
ethernet cards for IP connection and multiple HBA for redundancy plus
HACMP settings, so actually I'm running out of slots.... Thanks.



Jin Bae Chi (Gus)
System Admin/Tivoli
Data Center, CSCC
614-287-5270
614-287-5488 Fax
jbaechi AT cscc DOT edu


>>> frank.cermak AT EDS DOT COM 02/27/03 11:45AM >>>
No...we are using fibre IP connectivity for our TSM backups. Fibre HBA
can
use IP to link to the TSM server via a standard IP address...

Frank C.

-----Original Message-----
From: Stapleton, Mark [mailto:stapleto AT BERBEE DOT COM]
Sent: Thursday, February 27, 2003 8:31 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Client side Multi HBA Configuration


From: Cermak, Frank S [mailto:frank.cermak AT EDS DOT COM]
> Hi - can anyone provide insight on the configuration of
> client side multiple fibre HBAs using fibre over IP?

Er...I think you're asking the wrong mailing list.

--
Mark Stapleton (mark.stapleton AT berbee DOT com)