How you did the upgrade (4.1.6 -> 5.1.6.2 or 4.1.6 -> 5.1.0.0 -> 5.1.6.0 
-> 5.1.6.2 or otherwise)?
What is the fileset and version for the ITSM device driver?
You hope wrong or you hope normal :-)

Zlatko Krastev
IT Consultant






GUILLAUMONT Etienne <eguillau AT RGB-TECHNOLOGIE DOT FR>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
21.02.2003 15:07
Please respond to "ADSM: Dist Stor Manager"

 
        To:     ADSM-L AT VM.MARIST DOT EDU
        cc: 
        Subject:        Problem with Storagetek L20 and 5.1.6.2


Hello,

I juste upgraded my TSM server on AIX 4.3.3 to 5.1.6.2 from 4.1.6 and I 
had
to reinstall the devices software at 4.1 level to have my Storagetek work.
The library functionned but the DLT1 drives where unable to read tapes. I
got the following message :

20.02.03   14:06:43  ANR8302E I/O error on drive DLT1.2 (/dev/mt1)
(OP=SETMODE,
                      Error Number=22, CC=207, KEY=FF, ASC=FF, ASCQ=FF,
                      SENSE=**NONE**, Description=Device is not in a state
                      capable of performing request).  Refer to Appendix D
in
                      the 'Messages' manual for recommended action.

I just updated TSM to 5.1.6.2 and removed the drive and the library before
recreating them.

Did I do anything wrong or is it normal (I hope not)

Regards

Etienne GUILLAUMONT
e-mail : etienne AT rgb-technologie DOT fr

RGB Technologie
Parc d'Innovation, Bâtiment PYTHAGORE
11 Rue Jean SAPIDUS
67400 ILLKIRCH
Tél :  03 90 40 60 60
Fax : 03 90 40 60 61