|
Re: LTO 3583 Drive errors with TSM 5.1.5.2 on AIX 5.1
2003-01-29 16:14:23
Zlatko
No, I did not changed any settings for the FC HBA. The output of
the AIX command "lsattr -El fcsN" are the following:
- For fcs0
bus_intr_lvl 20 Bus interruptlevel False
intr_priority 3 Interrupt priority False
bus_io_addr 0x2ec00 Bus I/O address False
bus_mem_addr 0xc8020000 Bus memory address False
lg_term_dma 0x200000 N/A True
max_xfer_size 0x100000 Maximum Transfer Size True
num_cmd_elems 200 Maximum number of COMMANDS to queue to the adapter
True
pref_alpa 0x1 Preferred AL_PA True
sw_fc_class 2 FC Class for Fabric True
init_link al INIT Link flags True
- For fcs1
bus_intr_lvl 41 Bus interrupt leve False
intr_priority 3 Interrupt priority False
bus_io_addr 0x7ec00 Bus I/O address False
bus_mem_addr 0xf0020000 Bus memory address False
lg_term_dma 0x200000 N/A True
max_xfer_size 0x100000 Maximum Transfer Size True
num_cmd_elems 200 Maximum number of COMMANDS to queue to the adapter
True
pref_alpa 0x1 Preferred AL_PA True
sw_fc_class 2 FC Class for Fabric True
init_link al INIT Link flags True
The settings for the SDG, library and drives are the following:
1. SAN DataGateway
Firm: 4.20.05
- Device Mapping
LUN Device
0: Control LUN
1: SCSI-1: [6:0]ULT3583-TL
2: SCSI-1: [0:0]ULT3580-TD1
3: SCSI-1: [1:0]ULT3580-TD1
- FC port 1
Port Type: Node loop (NL_Port)
Port Mode: Target Only
Connection: loop only
Firm: 3.00.33
Frame size: 2048
Frame buffer size: 4,416
Media: GBIC SW 850nm, 2Gb
HostType: AIX
- Link Error Statistics
Link Failure Count:0
Loss of sync count:0
Loss of Signal Count:0
Primitive Sequence Protocol Error Count:0
Invalid Transmission Word Count:6
Invalid CRC Count:6
2. LIBRARY LTO 3583
Type: 3583L18
S/N: 78 12987
/dev/smc0
Firm: 2.80
3. Drive1
/dev/rmt1
Firm: 25D4
4. Drive2
/dev/rmt2
Firm: 25D4
I will appreciate any help.
Henry Aranda
From: Zlatko Krastev/ACIT <acit AT ATTGLOBAL DOT NET>
Reply-To: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: LTO 3583 Drive errors with TSM 5.1.5.2 on AIX 5.1
Date: Mon, 27 Jan 2003 13:07:12 +0200
Henrry,
did you changed the settings for the FC HBA? Can you provide the output of
AIX command "lsattr -El fcs0" (or fcsN if you have more HBAs)? Also level
of library firmware and drives microcode might sched some light.
Tape operations (and especially LTO ones) require larger blocks of data to
be send to keep streaming.
Zlatko Krastev
IT Consultant
Henrry Aranda <harango AT HOTMAIL DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
24.01.2003 22:46
Please respond to "ADSM: Dist Stor Manager"
To: ADSM-L AT VM.MARIST DOT EDU
cc:
Subject: LTO 3583 Drive errors with TSM 5.1.5.2 on AIX 5.1
Hi,
I have the following environment:
TSM Server 5.1.5.2 on AIX 5.1, a FC Adapter 6228 and an IBM LTO 3583 with
SANDataGateway.
When the library is performing an intensive write process, I get the
following messages in the activity log:
01/07/03 17:02:48 ANR8311E An I/O error occurred while accessing drive
3583DRV2 (/dev/rmt2) for WRITE operation, errno = 5.
01/07/03 17:02:48 ANR1411W Access mode for volume 393ACA now set to
"read-only" due to write error.
01/07/03 17:02:48 ANR8302E I/O error on drive 3583DRV2 (/dev/rmt2)
(OP=OFFL, Error Number=5, CC=0, KEY=0B, ASC=4E, ASCQ=00,
SENSE=70.00.0B.00.00.00.00.1C.00.00.00.00.4E.00.00.00.10-.47.00.00.00.01.20.20.20.20.20.20.20.1A.00.01.40.DF.01.0-0,
Description=An undetermined error has occurred). Refer to Appendix D in
the
'Messages' manual for recommended action.
IBM changed this drive twice, but I still get the same messages.
Does somebody know if it is a known problem with the OS or the TSM
version?
Thanks in advance,
Henry Aranda
_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8.
http://join.msn.com/?page=features/junkmail
_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8.
http://join.msn.com/?page=features/junkmail
|
|
|
