Hello,
I reconfigured a logical library on a 3584 library with an extra
drive (going from 3 to 4 drives). Trying to add this drive
to TSM fails.
This is on an AIX 5.1 machine with tsm server 5.1.5.4.
The curent status is: drive0 element=261 device=/dev/rmt0
drive1 element=262 device=/dev/rmt1
drive2 element=263 device=/dev/rmt2
The new drive is rmt3 on element address 264.
When I just define this drive it shows the following output:
tsm: TSMDH01>define drive 3584lib drive3 element=264 online=yes
ANR8366E DEFINE DRIVE: Invalid value for ELEMENT parameter.
ANS8001I Return code 3.
The error message is not very helpful on this error ('specify
a valid value', but I'm sure 264 is the valid value!)
I tried an 'audit library 3584lib' hoping that it learns there
is an extra tape drive, but that did not help.
So the qustions is: how can I define this new drive to TSM?
Kind regards,
-Marcel
--
======-------- Marcel J.E. Mol MESA Consulting B.V.
=======--------- ph. +31-(0)6-54724868 P.O. Box 112
=======--------- marcel AT mesa DOT nl 2630 AC
Nootdorp
__==== www.mesa.nl ---____U_n_i_x______I_n_t_e_r_n_e_t____ The Netherlands ____
They couldn't think of a number, Linux user 1148 -- counter.li.org
so they gave me a name! -- Rupert Hine -- www.ruperthine.com
|