Regards,
Daniel B.
-----Original Message-----
From: Jim Sporer [mailto:james.sporer AT DOIT.WISC DOT EDU]
Sent: Monday, January 13, 2003 11:29 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: label/checkin libvolume
Can't you just do a checkout with remove=no and then label the tapes?
Jim Sporer
At 01:16 PM 1/13/2003 -0800, you wrote:
> > -----Original Message-----
> > From: Cook, Dwight E [mailto:DWIGHT.E.COOK AT SAIC DOT COM]
> > Sent: Monday, January 13, 2003 11:58 AM
> > To: ADSM-L AT VM.MARIST DOT EDU
> > Subject: Re: label/checkin libvolume
> >
> > Well, TSM doesn't want to label them while they are PRIVATE
> > and TSM doesn't
> > really know what is going on...
> > You might be able to do a del vol against them to get them
> > back to scratch,
> > then do your label libvol
>
>Dwight-
>
>Thank you for the reply. I did try deleting them, but they are not part
>of a storage pool, so they cannot be "deleted" (and there is no "delete
>libvolume" command). I updated a couple of the volumes to scratch, just
>as a test. After updating them, I tried: "label libvol <LIBNAME>
>search=yes checkl=barcode checkin=scr overwrite=yes
>volrange=<vol1>,<vol2>". However, TSM reports 0 volumes labelled and
>exits with "Success".
>
>The only other thing I can think to do is to go to the library and
>physically remove them. Once removed, audit the library to show TSM that
>they are no longer in the library. Then, load them back in and check them
>in correctly.
>
>Any other ideas? Thanks.
>Peter
|