I believe if you look at the client for Solaris that is at
ftp:\\service.boulder.ibm.com you will find the correct information in the
client readme.
Paul D. Seay, Jr.
Technical Specialist
Naptheon Inc.
757-688-8180
-----Original Message-----
From: Gerald Wichmann [mailto:gwichman AT ZANTAZ DOT COM]
Sent: Monday, November 11, 2002 9:32 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: DB2 Backups on Solaris 8 Wrong documentation?
According to the Backing up DB2 PDF for backing up DB2 on Solaris, on page
92 step 2 it says:
2. The /etc/system must have, as a minimum, the following values. Modify
them as necessary, then reboot. set lwp_default_stksize = 0x4000 set
rpcmod:svc_run_stksize = 0x4000 set semsys:seminfo_semmap = 50 set
semsys:seminfo_semmni = 50 set semsys:seminfo_semmns = 300 set
semsys:seminfo_semmnu = 150 set semsys:seminfo_semopm = 50 set
semsys:seminfo_semume = 50 set semsys:seminfo_semmsl = 125
The above svc_run_stksize parameter throws an error during Solaris boot that
says something to the effect of it being an invalid parameter. Is this a
typo in the book? Should it actually be svc_default_stksize?
Looking at -> http://docs.sun.com/db/doc/806-6779/6jfmsfr7h?q=set+rpcmod
<http://docs.sun.com/db/doc/806-6779/6jfmsfr7h?q=set+rpcmod&a=view> &a=view
I don't see an svc_run_stksize
Anyone? IBM??
Gerald Wichmann
Senior Systems Development Engineer
Zantaz, Inc.
925.598.3099 (w)
This e-mail has been captured and archived by the ZANTAZ Digital Safe(tm)
service. For more information, visit us at www.zantaz.com.
IMPORTANT: This electronic mail message is intended only for the use of the
individual or entity to which it is addressed and may contain information
that is privileged, confidential or exempt from disclosure under applicable
law. If the reader of this message is not the intended recipient, or the
employee or agent responsible for delivering this message to the intended
recipient, you are hereby notified that any dissemination, distribution or
copying of this communication is strictly prohibited. If you have received
this communication in error, please notify the sender immediately by
telephone or directly reply to the original message(s) sent. Thank you.
|
