ADSM-L

Re: Automating RMAN Backup Through TSM

2002-11-06 10:43:53
Subject: Re: Automating RMAN Backup Through TSM
From: "Christy Wu, T.F." <tfwu AT TECHNOWORKS DOT NET>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Wed, 6 Nov 2002 23:37:27 +0800
Brian,

I did all steps in the TDPO setup guide. As to the libobk.a, I've linked it
to /usr/lib/libobk.a which in turn pointing to the library file of TSM.

Chris

----- Original Message -----
From: "Brian Dade" <BrianDade AT WDFA DOT COM>
To: <ADSM-L AT VM.MARIST DOT EDU>
Sent: Monday, November 04, 2002 11:28 PM
Subject: Re: Automating RMAN Backup Through TSM


> Hello Christy,
>
> This sounds like an error that I had prior to getting my backup to save to
> tape.  Have you verified that you're using the correct library file,
> libobk.a ?
>
> Brian
>
>
>
>
> "Christy Wu, T.F." <tfwu AT TECHNOWORKS DOT NET>@VM.MARIST.EDU> on 10/30/2002
> 10:48:58 PM
>
> Please respond to "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
>
> Sent by:    "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
>
>
> To:    ADSM-L AT VM.MARIST DOT EDU
> cc:
>
> Subject:    Re: Automating RMAN Backup Through TSM
>
>
> Hi Brian,
>
> I have similar setup to your but unfortunately not able to get the rman
> backup to tape. I tried to isolate the problem without TSM by simply using
> rman to backup to an internal 4mm tape drive but get an error that unable
> to
> initialize the subsystem (SBT) layer. Is there any configuration need to
be
> specified in using the tape device?
>
> Bypass the TSM and use the native rman command to backup to an internal
4mm
> tape drive, I used following:
> rman target / nocatalog
> > run {
> > allocate channel t1 type 'sbt_tape';
> > backup tablespace tools;
> > }
>
> I expect the command to backup to tape, but it failed with the error I
> stated above. Any configuration I need to do with 'sbt_tape' under Oracle?
> Hope you can give me some hints here. Thanks.
>
>
> Chris
>
>
> ----- Original Message -----
> From: "Brian Dade" <BrianDade AT WDFA DOT COM>
> To: <ADSM-L AT VM.MARIST DOT EDU>
> Sent: Thursday, October 31, 2002 12:13 AM
> Subject: Automating RMAN Backup Through TSM
>
>
> > Hi All:
> >
> > I'm currently running my TDP for Oracle backup manually from a UNIX
> prompt.
> > I'd like to automate this through TSM.  I 'm confused.  Has anyone
> > automated this process?  If so, I'd like to hear some suggestions or
> > recommendations on setting it up.
> >
> > OS:  AIX 4.3.3
> > TSM:  4.2.1.10
> > TDP:  2.2.1
> >
> > Thanks,
> > Brian
> >
>

<Prev in Thread] Current Thread [Next in Thread>