All SCSI devices conforming to the standards are backward-compatible. Thus
you can use Ultra160 HDD with SCSI-2 F/W controller or connect a SCSI-2
device to Ultra2 controller, etc. The transfer speed in the lowest
supported by both controller and device.
I am running different combinations and had no serious problems. The main
problem with components of different generations are cables and/or
(connector) convertors.

Zlatko Krastev
IT Consultant






Mark Stapleton <stapleto AT BERBEE DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
27.10.2002 19:06
Please respond to "ADSM: Dist Stor Manager"


        To:     ADSM-L AT VM.MARIST DOT EDU
        cc:
        Subject:        SCSI-2 tape drives


I'm trying to set up a portable demo unit for TSM, using a laptop that has
an Adaptec APA-1460A PCMCIA card; the card supports SCSI-2. Does anyone
out
there have any experience with any compatible (and current) tape drive
that'll run of this card?

--
Mark Stapleton (stapleton AT berbee DOT com)
Certified TSM consultant
Certified AIX system engineer
MCSE