Re: Script problems

        Thanks for all the replies. It looks like the '-outfile' option is
the one that will work....

Thanks,
Ben

-----Original Message-----
From: Frost, Dave [mailto:dave.frost AT SUNGARD DOT COM]
Sent: Wednesday, October 09, 2002 4:43 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Script problems


try adding the parameter "-outfile" to the dsmc command.  From unix..

dsmadmc -id=xx -pa=yy -outfile -tab select volume_name from volumes \
        where devclass_name like \'3590DEV\'


  regards,

-=Dave=-
--
+44 (0)20 7608 7140

A Bugless Program is an Abstract Theoretical Concept.



-----Original Message-----
From: Seay, Paul [mailto:seay_pd AT NAPTHEON DOT COM]
Sent: Wednesday, October 09, 2002 2:20 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Script problems


I do not know why yours stopped working, but this will work:

dsmadmc -id=## -pass=##  "select volume_name from volumes where
devclass_name like '3590DEV' " |cat

Paul D. Seay, Jr.
Technical Specialist
Naptheon Inc.
757-688-8180


-----Original Message-----
From: bbullock [mailto:bbullock AT MICRON DOT COM]
Sent: Tuesday, October 08, 2002 7:28 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Script problems


        Folks,

Just today, I upgraded from TSM 4.1 to TSM 5.1 This is an AIX host running
4.3.3 ML 10. Everything went smoothly. It even rebuilt the new "path"
configurations for the tapes and drives by itself. I didn't have the
"cleanup backupset" issue because this TSM server only backs up some VMS
clusters, so I had no "SYSTEM OBJECTS". I most likely will not be so lucky
in 2 weeks when I have to upgrade some TSM servers that backup NT hosts)

        I've only encountered 1 problem this far:

I gather some stats off of the TSM server with various scripts. When I run
these scripts, I typically put a "</dev/null" on the end, otherwise it gets
to the first "(<ENTER> to continue, 'C' to cancel)" prompt and just sits
there. As a simple example:

         dsmadmc -id=## -pass=##  "select volume_name from volumes where
devclass_name like '3590DEV' " </dev/null

        (to get a listing of tape numbers of a certain device class).

This has always worked in the past but now that I'm at 5.1, it gets to the
first "(<ENTER> to continue, 'C' to cancel)" prompt and then perpetually
spews:
        ...
        The character '#' stands for any decimal integer.The only valid
responses are characters from this set: [Enter, C]
        The character '#' stands for any decimal integer.The only valid
responses are characters from this set: [Enter, C]
        The character '#' stands for any decimal integer.The only valid
responses are characters from this set: [Enter, C]
        ...

        It seems to dislike the "</dev/null" very much.

        Anybody seen this? Is there a better way to do this? I'm guessing
there is, otherwise it would be in the archives. Something like a
"-youdonthavetohittheenterkey" option.

        Somebody enlighten me. ;-)

Thanks,
Ben

________________________________________________________________________
This e-mail has been scanned for all viruses by MessageLabs.

________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service. For more information on a proactive anti-virus service working
around the clock, around the globe, visit http://www.messagelabs.com
________________________________________________________________________