It is in the activity log. I run the following select daily to kick out
what to consider.
/* This select scans the activity log for the last 23 hours and 55 minutes
*/
select substr(cast(date_time as char(26)),1,16) as "date time", message as
"Message " from actlog where
date_time >current_timestamp - 24 hours - 5 minutes and msgno in (8359,
8302, 1412, 1229, 1402, 1440, 8873)
Paul D. Seay, Jr.
Technical Specialist
Naptheon Inc.
757-688-8180
-----Original Message-----
From: Nancy Reeves [mailto:Nancy.Reeves AT WICHITA DOT EDU]
Sent: Wednesday, October 02, 2002 3:54 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: bad tapes
Actually, ours get marked "unavailable".
Nancy Reeves
Technical Support, Wichita State University
Nancy.Reeves AT wichita DOT edu 316-978-3860
-------------
Orin Rehorst wrote:
In a manual tape drive arrangement, if TSM calls for a tape and you don't
mount it within the timeout period, TSM will mark it read only.
Regards,
Orin
-----Original Message-----
From: Pearson, Dave [mailto:DCPearson AT SNOPUD DOT COM]
Sent: Wednesday, October 02, 2002 1:46 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: bad tapes
Hello,
If you do a "q volume nnnnnn f=d" (nnnnnn=volume name) this will tell you
the "Number of Write Errors:" and "Number of Read Errors:" amoung with other
good information.
Dave Pearson
IS PRoduction Support Analyst
System and Network Service
Snohomish County PUD # 1
425.347.4420
Number of Write Errors: 0 Number of Read Errors: 0
> -----Original Message-----
> From: David Longo [SMTP:David.Longo AT HEALTH-FIRST DOT ORG]
> Sent: Wednesday, October 02, 2002 11:30 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: bad tapes
>
> 1. Not that I know of. However you can do it manually with the Update
> Volume Command.
>
> 2. One way I do is to use the actlog:
> q actlog begind=-1 search=i/o
> This will show any I/O errors in last day. You can search
> on other specific message numbers of other patterns/words.
>
> David Longo
>
> >>> alazarev AT HERA.ITG.UIUC DOT EDU 10/02/02 02:11PM >>>
> I've got a pretty simple question:
>
> some of my tapes are automatically turning to READ ONLY state. That's
> cool I assume the server detects a read/write error, then sets the
> tape to READ
> ONLY.
>
> 1) is there any scenareo where a tape is still good, yet the server
> sets it to READ ONLY?
>
> 2) where is the log for read/write errors. only way i know of is
> looking at the >dsmadmc -console window and seeing it as it scrolls
> by. i want to
> confirm a tape had read/write errors before i remove it from the
> library.
>
> thanks in advnace,
>
> alex
> --- ---
> Alex Lazarevich | Systems | Imaging Technology Group
> alazarev AT itg.uiuc DOT edu | (217)244-1565 | www.itg.uiuc.edu
> --- ---
>
>
> "MMS <health-first.org>" made the following
> annotations on 10/02/2002 02:31:53 PM
>
--------------------------------------------------------------------------
> ----
> This message is for the named person's use only. It may contain
> confidential, proprietary, or legally privileged information. No
> confidentiality or privilege is waived or lost by any mistransmission.
If
> you receive this message in error, please immediately delete it and
> all copies of it from your system, destroy any hard copies of it, and
> notify the sender. You must not, directly or indirectly, use,
> disclose, distribute, print, or copy any part of this message if you
> are not the intended recipient. Health First reserves the right to
> monitor all
e-mail
> communications through its networks. Any views or opinions expressed
> in this message are solely those of the individual sender, except (1)
> where the message states such views or opinions are on behalf of a
> particular entity; and (2) the sender is authorized by the entity to
> give such
views
> or opinions.
>
>
==========================================================================
> ====
|
