Michael,
Here is the dsm.sys file as found in /opt/tivoli/tsm/client/ba/bin
(The dsm.opt is empty) that we use to backup our IBM DB2 server running
on RedHat Linux 7.3
************************************************************************
* Tivoli Storage Manager
*
*
*
* Sample Client System Options file for UNIX (dsm.sys.smp)
*
************************************************************************
* This file contains the minimum options required to get started
* using TSM. Copy dsm.sys.smp to dsm.sys. In the dsm.sys file,
* enter the appropriate values for each option listed below and
* remove the leading asterisk (*) for each one.
* If your client node communicates with multiple TSM servers, be
* sure to add a stanza, beginning with the SERVERNAME option, for
* each additional server.
************************************************************************
SErvername peidb24_1
TCPWINDOWSIZE 1024
TCPBUFFSIZE 512
nodename peidb24_1
COMMmethod TCPip
TCPPort 1500
TCPServeraddress ###.###.###.###
passwordaccess generate
EXCLUDE "/.../swapfile"
COMMmethod TCPip
SCHEDLOGNAME /opt/tivoli/tsm/client/ba/bin/dsmsched_daily.log
ERRORLOGNAME /opt/tivoli/tsm/client/ba/bin/dsmerror_daily.log
schedlogretention 5 S
errorlogretention 5 S
LARGECOMMBUFFERS YES
MEMORYEFFICIENTBACKUP NO
TCPBUFFSIZE 512
TCPNODELAY YES
TXNBYTELIMIT 2048
The job is scheduled from the TSM Server and runs a script on the Linux
box. The contents of the script called backup-peidb24-daily is as
follows:
dsmc incremental / -se=peidb24_1
dsmc incremental /usr -se=peidb24_1
dsmc incremental /var -se=peidb24_1
dsmc incremental /opt -se=peidb24_1
dsmc incremental /home -se=peidb24_1
dsmc incremental /u01 -se=peidb24_1
dsmc incremental /boot -se=peidb24_1
Hope this helps.
>>> Michael_Moore AT VFC DOT COM 09/23/02 02:28PM >>>
I need some help setting up a Linux client. Specifically, I need a
sample
DSM.opt, and DSM.sys file. The group responsible for this node, is
trying
to run the backup via a cron job, but when the backup starts, it asks
for a
password. When the node was orginally setup, here is what was put
into
each file, adn as you can see, it is missing alot of information:
DSM.sys:
************************************************************************
* Tivoli Storage Manager
*
*
*
* Sample Client System Options file for UNIX (dsm.sys.smp)
*
************************************************************************
* This file contains the minimum options required to get started
* using TSM. Copy dsm.sys.smp to dsm.sys. In the dsm.sys file,
* enter the appropriate values for each option listed below and
* remove the leading asterisk (*) for each one.
* If your client node communicates with multiple TSM servers, be
* sure to add a stanza, beginning with the SERVERNAME option, for
* each additional server.
************************************************************************
SErvername server_a
COMMmethod TCPip
TCPPort 1500
TCPServeraddress tsm390
DM.opt:
************************************************************************
* Tivoli Storage Manager
*
*
*
* Sample Client User Options file for UNIX (dsm.opt.smp)
*
************************************************************************
* This file contains an option you can use to specify the TSM
* server to contact if more than one is defined in your client
* system options file (dsm.sys). Copy dsm.opt.smp to dsm.opt.
* If you enter a server name for the option below, remove the
* leading asterisk (*).
************************************************************************
* SErvername A server name defined in the dsm.sys file
Currently, most of my exposure to setting up clients has been on the
NT/W2K
side, and here is what I had the NT group use there:
********************************************************************
* IBM Adstar Distributed Storage Manager
*
* 32-Bit Windows backup and archive Client - V3 level
* Note: * - option not used
* ** - option specified at server
* Changed 6/13/02 JWG NSF files backing up to Tape per MM
************************************************************************
BackupRegistry Yes
**ChangingRetries 4
ClusterNode No
CommMethod TcpIp
CommRestartDuration 9999
CommRestartInterval 15
**CompressAlways Yes
**Compression Yes
*CPICBufferSize
*CPICModeName
DateFormat 1
**DirMC STDPERM
**Domain all-local
Editor Yes
ErrorLogName dsmerror.log
ErrorLogRetention 14 D
GuiTreeViewAfterBackup Yes
HttpPort 1581
HttpsPort 0
*IPXBufferSize
*IPXServerAddress
*IPXSocket
*LanAdapter
LANG AMENG
LargeCommBuffers Yes
**MaxCmdRetries 4
MemoryEfficientBackup No
*NamedPipeName
*NetBiosBufferSize
*NetBiosName
*NetBiosServerName
*NetBiosTimeOut
*Nodename
NumberFormat 1
*PartnerLuName
*Password
PasswordAccess Generate
*PostScheduleCmd
*PreScheduleCmd
QuerySchedPeriod 6
*Quiet
Replace Prompt
ResourceUtilization 2
**RetryPeriod 20
RevokeRemoteAccess None
RunAsService No
SchedLogName dsmsched.log
SchedLogRetention 14 D
**SchedMode Prompted
**Scrollines 20
**ScrollPrompt Yes
SkipNTPermissions No
SkipNTSecurityCRC No
**Subdir Yes
*SymbolicDestination
**TapePrompt No
TCPBuffSize 512
TCPClientAddress 10.1.3.38
*TCPClientPort 1501
TCPNoDelay Yes
TCPPort 1500
TCPServerAddress TSM390
TCPWindowSize 63
TimeFormat 1
*TPName
**TxnByteLimit 2048
UseUnicodeFileNames No
Verbose
*tracemax 10000
*traceflag service
*tracefile d:\tsm\trace\tracefile.txt
************************************************************************
* Exclude and Include
*
* +------------------+----------------------------------------------+
* | EXclude | pattern |
* +------------------+----------------------------------------------+
* | INclude | pattern |
* +------------------+----------------------------------------------+
*
* EXclude and INclude patterns are written using an extended pattern
* match language. This language uses the native operating system's
* metacharacters (wildcards) whenever possible. A list of the
* supported metacharacters for the match language follows:
*
* Function AIX DOS OS/2
* --------------------- -------- -------- ---------
* Match one character ? ? ?
* Match n characters * * *
* Match n directories /... (1) \... (1) \... (1)
* Directory Separator / \ \
* Open Character Class [ [(1) [(1)
* Character Class Range - - (1) - (1)
* Close Character Class ] ](1) ](1)
* Literal Escape \ \ (1) \ (1)
* Drive Separator none : :
*
*
************************************************************************
Include *:\...\*.nsf notes
Include *:\...\*.nsf.DATA notes
Exclude *:\...\WIN*.SWP
Exclude *:\...\SYSTEM32\CONFIG\*.*
Exclude *:\...\SYSTEM32\CONFIG\...\*
Exclude *:\...\PAGEFILE.SYS
Exclude *:\...\OFM\*.*
Exclude *:\...\OFM\...\*
Exclude *:\...\ntuser.*
Exclude *:\...\RecoveryBin\*.*
Exclude *:\...\RecoveryBin\...\*
Exclude *:\...\RECYCLER\*.*
Exclude *:\...\RECYCLER\...\*
Anybody have some samples?
Authentication is turned on, due to a requirement, so I can't turn if
off.
Thanks for any help that can be provided!
Michael Moore
VF Services Inc.
121 Smith Street
Greensboro, NC 27420-1488
Voice: 336-332-4423
Fax: 336-332-4544
|
